duoram/Docker/repro.sh

#!/bin/bash

# Reproduce the Duoram experiments from our paper:

# Adithya Vadapalli, Ryan Henry, Ian Goldberg. Duoram: A
# Bandwidth-Efficient Distributed ORAM for 2- and 3-Party Computation.
# USENIX Security Symposium 2023.

# cd into the directory containing this script (from the bash faq 028)
if [[ $BASH_SOURCE = */* ]]; then
  cd -- "${BASH_SOURCE%/*}/" || exit
fi

# If the master NUMA commands are set, use them for Duoram
if [ "$NUMA_P0" != "" ]; then
    export DUORAM_NUMA_P0="$NUMA_P0"
fi
if [ "$NUMA_P1" != "" ]; then
    export DUORAM_NUMA_P1="$NUMA_P1"
fi

# Allow running only subsets of the experiment suite.  Valid values are
# "test", "small", "large", "scaling", "all", "none".  ("none" is useful
# if you just want to re-parse the output of existing logs.  "scaling"
# is the subset of "small" that generates the data points for Figure 10;
# see the README for that one, since you need a machine with at least 64
# cores to generate it.)  You can also say "single" followed by all the
# arguments to "run" (below) to run a single experiment; for example:
# ./repro single readwrite 20 1us 100gbit 128
if [ "$1" = "" ]; then
    whichexps="test"
else
    whichexps="$1"
fi

# The number of operations per run; the graphs in the paper use 128
if [ "$whichexps" = "single" -o "$2" = "" ]; then
    # If there's an explicit experiment on the command line, don't read
    # the next argument as the number of operations.  $numops will be
    # ignored, anyway, since it will be specified as part of the
    # command.
    numops=128
else
    numops="$2"
fi

# Run one experiment
# Arguments:
# $1: mode (read, write, readwrite)
# $2: depth (the ORAM has 2^depth elements)
# $3: latency (e.g., 30ms)
# $4: bandwidth (e.g., 100mbit)
# $5: number of operations (e.g., 128)
run() {
    now=`date`
    echo "$now: Running $1 $2 $3 $4 $5 ..."
    logfile="${1}_${3}_${4}_${5}.out${LOGSUFFIX}"
    sh set-networking.sh $3 $4
    echo "Network setup: $3 $4" >> $logfile
    sh run-experiment.sh $1 $2 $5 >> $logfile
}

# Parse the output logs.  We run this in the docker in case you don't
# have perl installed on the host.
# Arguments: a list of logfiles
parse() {
    cat $* | docker exec -w /root -i floram_p0 ./parse_logs
}

# A very small kick-the-tires test to ensure everything compiled and
# built properly
if [ "$whichexps" = "test" ]; then
    echo "Running test experiment..."
    run read 16 1us 100gbit 2
    parse read_1us_100gbit_2.out${LOGSUFFIX}
    exit
fi

# Be able to run a single experiment specified on the command line
if [ "$whichexps" = "single" ]; then
    echo "Running single experiment..."
    shift
    run $*
    exit
fi

now=`date`
echo "$now: Starting experiments"

# if [ "$whichexps" = "small" -o "$whichexps" = "all" ]; then
#     echo "Running small experiments..."
#     # Figure 7(a), 8(c)
#     run readwrite 16 30ms 100mbit ${numops}
#     run readwrite 18 30ms 100mbit ${numops}
#     run readwrite 20 30ms 100mbit ${numops}
#     run readwrite 22 30ms 100mbit ${numops}
#     run readwrite 24 30ms 100mbit ${numops}
#     run readwrite 26 30ms 100mbit ${numops}
#     # Figure 7(b)
#     run readwrite 20 30ms 10mbit ${numops}
#     run readwrite 20 30ms 30mbit ${numops}
#     run readwrite 20 30ms 50mbit ${numops}
#     run readwrite 20 30ms 70mbit ${numops}
#     run readwrite 20 30ms 90mbit ${numops}
#     run readwrite 20 30ms 110mbit ${numops}
#     # Figure 7(c)
#     run readwrite 20 10ms 100mbit ${numops}
#     run readwrite 20 50ms 100mbit ${numops}
#     run readwrite 20 70ms 100mbit ${numops}
#     # Figures 8(a), 9(b), and 9(c)
#     # Note that we set the latency to 1us, which really means "don't add
#     # artificial latency", but we measure the one-way latency to
#     # actually be 30us, which is what we report in the paper. (pings
#     # from one docker to the other take about 60us round trip.)
#     run read 16 1us 100gbit ${numops}
#     run read 18 1us 100gbit ${numops}
#     run read 20 1us 100gbit ${numops}
#     run read 22 1us 100gbit ${numops}
#     run read 24 1us 100gbit ${numops}
#     run read 26 1us 100gbit ${numops}
#     # Figure 8(b)
#     run write 16 1us 100gbit ${numops}
#     run write 18 1us 100gbit ${numops}
#     run write 20 1us 100gbit ${numops}
#     run write 22 1us 100gbit ${numops}
#     run write 24 1us 100gbit ${numops}
#     run write 26 1us 100gbit ${numops}
#     # Figure 9(a)
#     run read 18 30ms 100mbit ${numops}
#     run read 22 30ms 100mbit ${numops}
#     run read 24 30ms 100mbit ${numops}
# fi
# if [ "$whichexps" = "small" -o "$whichexps" = "scaling" -o "$whichexps" = "all" ]; then
#     # Figures 9(a), 10
#     run read 16 30ms 100mbit ${numops}
#     run read 20 30ms 100mbit ${numops}
#     run read 26 30ms 100mbit ${numops}
# fi
# if [ "$whichexps" = "large" -o "$whichexps" = "all" ]; then
#     echo "Running large experiments..."
#     # Figure 9(a)
#     run read 28 30ms 100mbit ${numops}
#     run read 30 30ms 100mbit ${numops}
#     run read 32 30ms 100mbit ${numops}
#     # Figures 9(b) and 9(c)
#     run read 28 1us 100gbit ${numops}
#     run read 30 1us 100gbit ${numops}
#     run read 32 1us 100gbit ${numops}
# fi

# now=`date`
# echo "$now: Experiments complete"

# # If you specified a custom log suffix, you're going to be parsing the
# # outputs differently.
# if [ "$LOGSUFFIX" = "" ]; then

# parse *_${numops}.out > floram_${numops}.dat

# echo
# echo "# Figure 7(a)"
# egrep 'Duoram readwrite .* 30ms 100mbit .* s$' floram_${numops}.dat | sort -k3 -n
# echo
# echo "# Figure 7(b)"
# egrep 'Duoram readwrite 20 30ms .* s$' floram_${numops}.dat | sort -k5 -n
# echo
# echo "# Figure 7(c)"
# egrep 'Duoram readwrite 20 .* 100mbit .* s$' floram_${numops}.dat | sort -k4 -n
# echo
# echo "# Figure 8(a)"
# egrep 'Duoram read .* 1us 100gbit .* KiB$' floram_${numops}.dat | sort -k3 -n
# echo
# echo "# Figure 8(b)"
# egrep 'Duoram write .* 1us 100gbit .* KiB$' floram_${numops}.dat | sort -k3 -n
# echo
# echo "# Figure 8(c)"
# egrep 'Duoram readwrite .* 30ms 100mbit .* KiB$' floram_${numops}.dat | sort -k3 -n
# echo
# echo "# Figure 9(a)"
# egrep 'Duoram read .* 30ms 100mbit .* s$' floram_${numops}.dat | sort -k3 -n
# echo
# echo "# Figure 9(b)"
# egrep 'Duoram read .* 1us 100gbit .* s$' floram_${numops}.dat | sort -k3 -n
# echo
# echo "# Figure 9(c)"
# egrep 'Duoram read .* 1us 100gbit .* KiB$' floram_${numops}.dat | sort -k3 -n

# fi