/* * Copyright (C) 2011-2016 Intel Corporation. All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * Neither the name of Intel Corporation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * */ /** * File: sgx_tcrypto.h * Description: * Interface for generic crypto library APIs required in SDK implementation. */ #ifndef _SGX_TCRYPTO_H_ #define _SGX_TCRYPTO_H_ #include "sgx.h" #include "sgx_defs.h" #define SGX_SHA256_HASH_SIZE 32 #define SGX_ECP256_KEY_SIZE 32 #define SGX_NISTP_ECP256_KEY_SIZE (SGX_ECP256_KEY_SIZE/sizeof(uint32_t)) #define SGX_AESGCM_IV_SIZE 12 #define SGX_AESGCM_KEY_SIZE 16 #define SGX_AESGCM_MAC_SIZE 16 #define SGX_CMAC_KEY_SIZE 16 #define SGX_CMAC_MAC_SIZE 16 #define SGX_AESCTR_KEY_SIZE 16 typedef struct _sgx_ec256_dh_shared_t { uint8_t s[SGX_ECP256_KEY_SIZE]; } sgx_ec256_dh_shared_t; typedef struct _sgx_ec256_private_t { uint8_t r[SGX_ECP256_KEY_SIZE]; } sgx_ec256_private_t; typedef struct _sgx_ec256_public_t { uint8_t gx[SGX_ECP256_KEY_SIZE]; uint8_t gy[SGX_ECP256_KEY_SIZE]; } sgx_ec256_public_t; typedef struct _sgx_ec256_signature_t { uint32_t x[SGX_NISTP_ECP256_KEY_SIZE]; uint32_t y[SGX_NISTP_ECP256_KEY_SIZE]; } sgx_ec256_signature_t; typedef void* sgx_sha_state_handle_t; typedef void* sgx_cmac_state_handle_t; typedef void* sgx_ecc_state_handle_t; typedef uint8_t sgx_sha256_hash_t[SGX_SHA256_HASH_SIZE]; typedef uint8_t sgx_aes_gcm_128bit_key_t[SGX_AESGCM_KEY_SIZE]; typedef uint8_t sgx_aes_gcm_128bit_tag_t[SGX_AESGCM_MAC_SIZE]; typedef uint8_t sgx_cmac_128bit_key_t[SGX_CMAC_KEY_SIZE]; typedef uint8_t sgx_cmac_128bit_tag_t[SGX_CMAC_MAC_SIZE]; typedef uint8_t sgx_aes_ctr_128bit_key_t[SGX_AESCTR_KEY_SIZE]; typedef enum { SGX_EC_VALID, /* validation pass successfully */ SGX_EC_COMPOSITE_BASE, /* field based on composite */ SGX_EC_COMPLICATED_BASE, /* number of non-zero terms in the polynomial (> PRIME_ARR_MAX) */ SGX_EC_IS_ZERO_DISCRIMINANT,/* zero discriminant */ SGX_EC_COMPOSITE_ORDER, /* composite order of base point */ SGX_EC_INVALID_ORDER, /* invalid base point order */ SGX_EC_IS_WEAK_MOV, /* weak Meneze-Okamoto-Vanstone reduction attack */ SGX_EC_IS_WEAK_SSA, /* weak Semaev-Smart,Satoh-Araki reduction attack */ SGX_EC_IS_SUPER_SINGULAR, /* supersingular curve */ SGX_EC_INVALID_PRIVATE_KEY, /* !(0 < Private < order) */ SGX_EC_INVALID_PUBLIC_KEY, /* (order*PublicKey != Infinity) */ SGX_EC_INVALID_KEY_PAIR, /* (Private*BasePoint != PublicKey) */ SGX_EC_POINT_OUT_OF_GROUP, /* out of group (order*P != Infinity) */ SGX_EC_POINT_IS_AT_INFINITY,/* point (P=(Px,Py)) at Infinity */ SGX_EC_POINT_IS_NOT_VALID, /* point (P=(Px,Py)) out-of EC */ SGX_EC_POINT_IS_EQUAL, /* compared points are equal */ SGX_EC_POINT_IS_NOT_EQUAL, /* compared points are different */ SGX_EC_INVALID_SIGNATURE /* invalid signature */ } sgx_generic_ecresult_t; #ifdef __cplusplus extern "C" { #endif /** SHA Hashing functions - NOTE: ONLY 256-bit is supported. * * NOTE: Use sgx_sha256_msg if the src pointer contains the complete msg to perform hash (Option 1) * Else use the Init, Update, Update, ..., Final procedure (Option 2) * Option 1: If the complete dataset is available for hashing, sgx_sha256_msg * is a single API call for generating the 256bit hash for the given dataset. * Return: If source pointer or hash pointer are NULL, SGX_ERROR_INVALID_PARAMETER is returned. * If hash function fails then SGX_ERROR_UNEXPECTED is returned. * Option 2: If the hash is to be performed over multiple data sets, then use: * A. sgx_sha256_init - to create the context - context memory is allocated by this function. * Return: If out of enclave memory, SGX_ERROR_OUT_OF_MEMORY is returned. * If context creation fails then SGX_ERROR_UNEXPECTED is returned. * B. sgx_sha256_update - updates hash based on input source data * This function should be called for each chunk of data to be * included in the hash including the 1st and final chunks. * Return: If source pointer or context pointer are NULL, SGX_ERROR_INVALID_PARAMETER is returned. * If hash function fails then SGX_ERROR_UNEXPECTED is returned. * C. sgx_sha256_get_hash - function obtains the hash value * Return: If hash pointer or context pointer are NULL, SGX_ERROR_INVALID_PARAMETER is returned. * If the function fails then SGX_ERROR_UNEXPECTED is returned. * D. sgx_sha256_close - SHOULD BE CALLED to FREE context memory * Upon completing the process of computing a hash over a set of data * or sets of data, this function is used to free the context. * Return: If context pointer is NULL, SGX_ERROR_INVALID_PARAMETER is returned. * * Parameters: * Return: sgx_status_t - SGX_SUCCESS or failure as defined in sgx_error.h * Inputs: uint8_t *p_src - Pointer to the input stream to be hashed * uint32_t src_len - Length of the input stream to be hashed * Output: sgx_sha256_hash_t *p_hash - Resultant hash from operation */ sgx_status_t SGXAPI sgx_sha256_msg(const uint8_t *p_src, uint32_t src_len, sgx_sha256_hash_t *p_hash); /** Allocates and initializes sha256 state * * Parameters: * Return: sgx_status_t - SGX_SUCCESS or failure as defined in sgx_error.h * Output: sgx_sha_state_handle_t *p_sha_handle - Pointer to the handle of the SHA256 state */ sgx_status_t SGXAPI sgx_sha256_init(sgx_sha_state_handle_t* p_sha_handle); /** Updates sha256 has calculation based on the input message * * Parameters: * Return: sgx_status_t - SGX_SUCCESS or failure as defined in sgx_error.h * Input: sgx_sha_state_handle_t sha_handle - Handle to the SHA256 state * uint8_t *p_src - Pointer to the input stream to be hashed * uint32_t src_len - Length of the input stream to be hashed */ sgx_status_t SGXAPI sgx_sha256_update(const uint8_t *p_src, uint32_t src_len, sgx_sha_state_handle_t sha_handle); /** Returns Hash calculation * * Parameters: * Return: sgx_status_t - SGX_SUCCESS or failure as defined in sgx_error.h * Input: sgx_sha_state_handle_t sha_handle - Handle to the SHA256 state * Output: sgx_sha256_hash_t *p_hash - Resultant hash from operation */ sgx_status_t SGXAPI sgx_sha256_get_hash(sgx_sha_state_handle_t sha_handle, sgx_sha256_hash_t *p_hash); /** Cleans up SHA state * * Parameters: * Return: sgx_status_t - SGX_SUCCESS or failure as defined in sgx_error.h * Input: sgx_sha_state_handle_t sha_handle - Handle to the SHA256 state */ sgx_status_t SGXAPI sgx_sha256_close(sgx_sha_state_handle_t sha_handle); /**Rijndael AES-GCM - Only 128-bit key AES-GCM Encryption/Decryption is supported * * The Galois/Counter Mode (GCM) is a mode of operation of the AES algorithm. * GCM [NIST SP 800-38D] uses a variation of the Counter mode of operation for encryption. * GCM assures authenticity of the confidential data (of up to about 64 GB per invocation) * using a universal hash function defined over a binary finite field (the Galois field). * * GCM can also provide authentication assurance for additional data * (of practically unlimited length per invocation) that is not encrypted. * GCM provides stronger authentication assurance than a (non-cryptographic) checksum or * error detecting code. In particular, GCM can detect both accidental modifications of * the data and intentional, unauthorized modifications. * * sgx_rijndael128GCM_encrypt: * Return: If key, source, destination, MAC, or IV pointer is NULL, SGX_ERROR_INVALID_PARAMETER is returned. * If AAD size is > 0 and the AAD pointer is NULL, SGX_ERROR_INVALID_PARAMETER is returned. * If the Source Length is < 1, SGX_ERROR_INVALID_PARAMETER is returned. * IV Length must = 12 (bytes) or SGX_ERROR_INVALID_PARAMETER is returned. * If out of enclave memory then SGX_ERROR_OUT_OF_MEMORY is returned. * If the encryption process fails then SGX_ERROR_UNEXPECTED is returned. * * sgx_rijndael128GCM_decrypt: * Return: If key, source, destination, MAC, or IV pointer is NULL, SGX_ERROR_INVALID_PARAMETER is returned. * If AAD size is > 0 and the AAD pointer is NULL, SGX_ERROR_INVALID_PARAMETER is returned. * If the Source Length is < 1, SGX_ERROR_INVALID_PARAMETER is returned. * IV Length must = 12 (bytes) or SGX_ERROR_INVALID_PARAMETER is returned. * If the decryption process fails then SGX_ERROR_UNEXPECTED is returned. * If the input MAC does not match the calculated MAC, SGX_ERROR_MAC_MISMATCH is returned. * * Parameters: * Return: sgx_status_t - SGX_SUCCESS or failure as defined in sgx_error.h * Inputs: sgx_aes_gcm_128bit_key_t *p_key - Pointer to the key used in encryption/decryption operation * Size MUST BE 128-bits * uint8_t *p_src - Pointer to the input stream to be encrypted/decrypted * uint32_t src_len - Length of the input stream to be encrypted/decrypted * uint8_t *p_iv - Pointer to the initialization vector * uint32_t iv_len - Length of the initialization vector - MUST BE 12 (bytes) * NIST AES-GCM recommended IV size = 96 bits * uint8_t *p_aad - Pointer to the input stream of additional authentication data * uint32_t aad_len - Length of the additional authentication data stream * sgx_aes_gcm_128bit_tag_t *p_in_mac - Pointer to the expected MAC in decryption process * Output: uint8_t *p_dst - Pointer to the cipher text for encryption or clear text for decryption. Size of buffer should be >= src_len. * sgx_aes_gcm_128bit_tag_t *p_out_mac - Pointer to the MAC generated from encryption process * NOTE: Wrapper is responsible for confirming decryption tag matches encryption tag */ sgx_status_t SGXAPI sgx_rijndael128GCM_encrypt(const sgx_aes_gcm_128bit_key_t *p_key, const uint8_t *p_src, uint32_t src_len, uint8_t *p_dst, const uint8_t *p_iv, uint32_t iv_len, const uint8_t *p_aad, uint32_t aad_len, sgx_aes_gcm_128bit_tag_t *p_out_mac); sgx_status_t SGXAPI sgx_rijndael128GCM_decrypt(const sgx_aes_gcm_128bit_key_t *p_key, const uint8_t *p_src, uint32_t src_len, uint8_t *p_dst, const uint8_t *p_iv, uint32_t iv_len, const uint8_t *p_aad, uint32_t aad_len, const sgx_aes_gcm_128bit_tag_t *p_in_mac); /** Message Authentication Rijndael 128 CMAC - Only 128-bit key size is supported. * NOTE: Use sgx_rijndael128_cmac_msg if the src ptr contains the complete msg to perform hash (Option 1) * Else use the Init, Update, Update, ..., Final, Close procedure (Option 2) * Option 1: If the complete dataset is available for hashing, sgx_rijndael128_cmac_msg * is a single API call for generating the 128-bit hash for the given dataset. * Return: If source, key, or MAC pointer is NULL, SGX_ERROR_INVALID_PARAMETER is returned. * If out of enclave memory, SGX_ERROR_OUT_OF_MEMORY is returned. * If hash function fails then SGX_ERROR_UNEXPECTED is returned. * Option 2: If the hash is to be performed over multiple data sets, then use: * A. sgx_cmac128_init - to create the context - context memory is allocated by this function. * Return: If key pointer is NULL, SGX_ERROR_INVALID_PARAMETER is returned. * If out of enclave memory, SGX_ERROR_OUT_OF_MEMORY is returned. * If context creation fails then SGX_ERROR_UNEXPECTED is returned. * B. sgx_cmac128_update - updates hash based on input source data * This function should be called for each chunk of data to be * included in the hash including the 1st and final chunks. * Return: If source pointer or context pointer are NULL, SGX_ERROR_INVALID_PARAMETER is returned. * If hash function fails then SGX_ERROR_UNEXPECTED is returned. * C. sgx_cmac128_final - function obtains the hash value * Upon completing the process of computing a hash over a set of data or sets of data, * this function populates the hash value. * Return: If hash pointer or context pointer are NULL, SGX_ERROR_INVALID_PARAMETER is returned. * If the function fails then SGX_ERROR_UNEXPECTED is returned. * D. sgx_cmac128_close - SHOULD BE CALLED to clean up the CMAC state * Upon populating the hash value over a set of data or sets of data, * this function is used to free the CMAC state. * Return: If CMAC state pointer is NULL, SGX_ERROR_INVALID_PARAMETER is returned. * * Parameters: * Return: sgx_status_t - SGX_SUCCESS or failure as defined in sgx_error.h * Inputs: sgx_cmac_128bit_key_t *p_key - Pointer to the key used in encryption/decryption operation * uint8_t *p_src - Pointer to the input stream to be MAC’d * uint32_t src_len - Length of the input stream to be MAC’d * Output: sgx_cmac_gcm_128bit_tag_t *p_mac - Pointer to the resultant MAC */ sgx_status_t SGXAPI sgx_rijndael128_cmac_msg(const sgx_cmac_128bit_key_t *p_key, const uint8_t *p_src, uint32_t src_len, sgx_cmac_128bit_tag_t *p_mac); /** Allocates and initializes CMAC state. * * Parameters: * Return: sgx_status_t - SGX_SUCCESS or failure as defined in sgx_error.h * Inputs: sgx_cmac_128bit_key_t *p_key - Pointer to the key used in encryption/decryption operation * Output: sgx_cmac_state_handle_t *p_cmac_handle - Pointer to the handle of the CMAC state */ sgx_status_t SGXAPI sgx_cmac128_init(const sgx_cmac_128bit_key_t *p_key, sgx_cmac_state_handle_t* p_cmac_handle); /** Updates CMAC has calculation based on the input message. * * Parameters: * Return: sgx_status_t - SGX_SUCCESS or failure as defined in sgx_error.h * Input: sgx_cmac_state_handle_t cmac_handle - Handle to the CMAC state * uint8_t *p_src - Pointer to the input stream to be hashed * uint32_t src_len - Length of the input stream to be hashed */ sgx_status_t SGXAPI sgx_cmac128_update(const uint8_t *p_src, uint32_t src_len, sgx_cmac_state_handle_t cmac_handle); /** Returns Hash calculation and clean up CMAC state. * * Parameters: * Return: sgx_status_t - SGX_SUCCESS or failure as defined in sgx_error.h * Input: sgx_cmac_state_handle_t cmac_handle - Handle to the CMAC state * Output: sgx_cmac_128bit_tag_t *p_hash - Resultant hash from operation */ sgx_status_t SGXAPI sgx_cmac128_final(sgx_cmac_state_handle_t cmac_handle, sgx_cmac_128bit_tag_t *p_hash); /** Clean up the CMAC state * * Parameters: * Return: sgx_status_t - SGX_SUCCESS or failure as defined in sgx_error.h * Input: sgx_cmac_state_handle_t cmac_handle - Handle to the CMAC state */ sgx_status_t SGXAPI sgx_cmac128_close(sgx_cmac_state_handle_t cmac_handle); /** AES-CTR 128-bit - Only 128-bit key size is supported. * * These functions encrypt/decrypt the input data stream of a variable length according * to the CTR mode as specified in [NIST SP 800-38A]. The counter can be thought of as * an IV which increments on successive encryption or decrytion calls. For a given * dataset or data stream the incremented counter block should be used on successive * calls of the encryption/decryption process for that given stream. However for * new or different datasets/streams, the same counter should not be reused, instead * intialize the counter for the new data set. * * sgx_aes_ctr_encrypt * Return: If source, key, counter, or destination pointer is NULL, * SGX_ERROR_INVALID_PARAMETER is returned. * If out of enclave memory, SGX_ERROR_OUT_OF_MEMORY is returned. * If the encryption process fails then SGX_ERROR_UNEXPECTED is returned. * sgx_aes_ctr_decrypt * Return: If source, key, counter, or destination pointer is NULL, * SGX_ERROR_INVALID_PARAMETER is returned. * If out of enclave memory, SGX_ERROR_OUT_OF_MEMORY is returned. * If the decryption process fails then SGX_ERROR_UNEXPECTED is returned. * * Parameters: * Return: * sgx_status_t - SGX_SUCCESS or failure as defined * in sgx_error.h * Inputs: * sgx_aes_128bit_key_t *p_key - Pointer to the key used in * encryption/decryption operation * uint8_t *p_src - Pointer to the input stream to be * encrypted/decrypted * uint32_t src_len - Length of the input stream to be * encrypted/decrypted * uint8_t *p_ctr - Pointer to the counter block * uint32_t ctr_inc_bits - Number of bits in counter to be * incremented * Output: * uint8_t *p_dst - Pointer to the cipher text. * Size of buffer should be >= src_len. */ sgx_status_t SGXAPI sgx_aes_ctr_encrypt( const sgx_aes_ctr_128bit_key_t *p_key, const uint8_t *p_src, const uint32_t src_len, uint8_t *p_ctr, const uint32_t ctr_inc_bits, uint8_t *p_dst); sgx_status_t SGXAPI sgx_aes_ctr_decrypt( const sgx_aes_ctr_128bit_key_t *p_key, const uint8_t *p_src, const uint32_t src_len, uint8_t *p_ctr, const uint32_t ctr_inc_bits, uint8_t *p_dst); /** * Elliptic Curve Cryptography based on GF(p), 256 bit. * * Elliptic curve cryptosystems (ECCs) implement a different way of creating public keys. * Because elliptic curve calculation is based on the addition of the rational points in * the (x,y) plane and it is difficult to solve a discrete logarithm from these points, * a higher level of security is achieved through the cryptographic schemes that use the * elliptic curves. The cryptographic systems that encrypt messages by using the properties * of elliptic curves are hard to attack due to the extreme complexity of deciphering the * private key. * * Use of elliptic curves allows for shorter public key length and encourage cryptographers * to create cryptosystems with the same or higher encryption strength as the RSA or DSA * cryptosystems. Because of the relatively short key length, ECCs do encryption and decryption * faster on the hardware that requires less computation processing volumes. For example, with * a key length of 150-350 bits, ECCs provide the same encryption strength as the cryptosystems * who have to use 600 -1400 bits. * * ECCP stands for Elliptic Curve Cryptography Prime and these functions include operations * over a prime finite field GF(p). * */ /** Allocates and initializes ecc context. * The function initializes the context of the elliptic curve cryptosystem over the * prime finite field GF(p). This function allocates and initializes the ecc context. * Return: If out of enclave memory, SGX_ERROR_OUT_OF_MEMORY is returned. * If context creation fails then SGX_ERROR_UNEXPECTED is returned. * Parameters: * Return: sgx_status_t - SGX_SUCCESS or failure as defined in sgx_error.h * Output: sgx_ecc_state_handle_t *p_ecc_handle - Pointer to the handle of the ECC crypto system */ sgx_status_t SGXAPI sgx_ecc256_open_context(sgx_ecc_state_handle_t* p_ecc_handle); /** Cleans up ecc context. * Return: If context pointer is NULL, SGX_ERROR_INVALID_PARAMETER is returned. * Parameters: * Return: sgx_status_t - SGX_SUCCESS or failure as defined in sgx_error.h * Output: sgx_ecc_state_handle_t ecc_handle - Handle to the ECC crypto system */ sgx_status_t SGXAPI sgx_ecc256_close_context(sgx_ecc_state_handle_t ecc_handle); /** Populates private/public key pair. * NOTE: Caller code allocates memory for Private & Public key pointers to be populated * * The function generates a private key p_private and computes a public key p_public of the * elliptic cryptosystem over a finite field GF(p). * * The private key p_private is a number that lies in the range of [1, n-1] where n is * the order of the elliptic curve base point. * * The public key p_public is an elliptic curve point such that p_public = p_private ?G, * where G is the base point of the elliptic curve. * * The context of the point p_public as an elliptic curve point must be created by using * the function sgx_ecc256_open_context. * * Return: If context, public key, or private key pointer is NULL, * SGX_ERROR_INVALID_PARAMETER is returned. * If the key creation process fails then SGX_ERROR_UNEXPECTED is returned. * Parameters: * Return: sgx_status_t - SGX_SUCCESS or failure as defined in sgx_error.h * Inputs: sgx_ecc_state_handle_t ecc_handle - Handle to the ECC crypto system * Outputs: sgx_ec256_private_t *p_private - Pointer to the private key - LITTLE ENDIAN * sgx_ec256_public_t *p_public - Pointer to the public key - LITTLE ENDIAN */ sgx_status_t SGXAPI sgx_ecc256_create_key_pair(sgx_ec256_private_t *p_private, sgx_ec256_public_t *p_public, sgx_ecc_state_handle_t ecc_handle); /** Checks whether the input point is a valid point on the given elliptic curve. * Parameters: * Return: sgx_status_t - SGX_SUCCESS or failure as defined sgx_error.h * Inputs: sgx_ecc_state_handle_t ecc_handle - Handle to ECC crypto system * sgx_ec256_public_t *p_point - Pointer to perform validity check on - LITTLE ENDIAN * Output: int *p_valid - Return 0 if the point is an invalid point on ECC curve */ sgx_status_t SGXAPI sgx_ecc256_check_point(const sgx_ec256_public_t *p_point, const sgx_ecc_state_handle_t ecc_handle, int *p_valid); /** Computes DH shared key based on own (local) private key and remote public Ga Key. * NOTE: Caller code allocates memory for Shared key pointer to be populated * * The function computes a secret number bnShare, which is a secret key shared between * two participants of the cryptosystem. * * In cryptography, metasyntactic names such as Alice as Bob are normally used as examples * and in discussions and stand for participant A and participant B. * * Both participants (Alice and Bob) use the cryptosystem for receiving a common secret point * on the elliptic curve called a secret key. To receive a secret key, participants apply the * Diffie-Hellman key-agreement scheme involving public key exchange. The value of the secret * key entirely depends on participants. * * According to the scheme, Alice and Bob perform the following operations: * 1. Alice calculates her own public key pubKeyA by using her private key * privKeyA: pubKeyA = privKeyA ?G, where G is the base point of the elliptic curve. * 2. Alice passes the public key to Bob. * 3. Bob calculates his own public key pubKeyB by using his private key * privKeyB: pubKeyB = privKeyB ?G, where G is a base point of the elliptic curve. * 4. Bob passes the public key to Alice. * 5. Alice gets Bob's public key and calculates the secret point shareA. When calculating, * she uses her own private key and Bob's public key and applies the following formula: * shareA = privKeyA ?pubKeyB = privKeyA ?privKeyB ?G. * 6. Bob gets Alice's public key and calculates the secret point shareB. When calculating, * he uses his own private key and Alice's public key and applies the following formula: * shareB = privKeyB ?pubKeyA = privKeyB ?privKeyA ?G. * * Because the following equation is true privKeyA ?privKeyB ?G = privKeyB ?privKeyA ?G, * the result of both calculations is the same, that is, the equation shareA = shareB is true. * The secret point serves as a secret key. * * Shared secret bnShare is an x-coordinate of the secret point on the elliptic curve. The elliptic * curve domain parameters must be hitherto defined by the function: sgx_ecc256_open_context. * * Return: If context, public key, private key, or shared key pointer is NULL, * SGX_ERROR_INVALID_PARAMETER is returned. * If the remote public key is not a valid point on the elliptic curve, * SGX_ERROR_INVALID_PARAMETER is returned. * If the key creation process fails then SGX_ERROR_UNEXPECTED is returned. * * Parameters: * Return: sgx_status_t - SGX_SUCCESS or failure as defined in sgx_error.h * Inputs: sgx_ecc_state_handle_t ecc_handle - Handle to the ECC crypto system * sgx_ec256_private_t *p_private_b - Pointer to the local private key - LITTLE ENDIAN * sgx_ec256_public_t *p_public_ga - Pointer to the remote public key - LITTLE ENDIAN * Output: sgx_ec256_dh_shared_t *p_shared_key - Pointer to the shared DH key - LITTLE ENDIAN */ sgx_status_t SGXAPI sgx_ecc256_compute_shared_dhkey(sgx_ec256_private_t *p_private_b, sgx_ec256_public_t *p_public_ga, sgx_ec256_dh_shared_t *p_shared_key, sgx_ecc_state_handle_t ecc_handle); /** Computes signature for data based on private key. * * A message digest is a fixed size number derived from the original message with * an applied hash function over the binary code of the message. (SHA256 in this case) * The signer's private key and the message digest are used to create a signature. * * A digital signature over a message consists of a pair of large numbers, 256-bits each, * which the given function computes. * * The scheme used for computing a digital signature is of the ECDSA scheme, * an elliptic curve of the DSA scheme. * * The keys can be generated and set up by the function: sgx_ecc256_create_key_pair. * * The elliptic curve domain parameters must be created by function: * sgx_ecc256_open_context * * Return: If context, private key, signature or data pointer is NULL, * SGX_ERROR_INVALID_PARAMETER is returned. * If the signature creation process fails then SGX_ERROR_UNEXPECTED is returned. * * Parameters: * Return: sgx_status_t - SGX_SUCCESS or failure as defined in sgx_error.h * Inputs: sgx_ecc_state_handle_t ecc_handle - Handle to the ECC crypto system * sgx_ec256_private_t *p_private - Pointer to the private key - LITTLE ENDIAN * uint8_t *p_data - Pointer to the data to be signed * uint32_t data_size - Size of the data to be signed * Output: ec256_signature_t *p_signature - Pointer to the signature - LITTLE ENDIAN */ sgx_status_t SGXAPI sgx_ecdsa_sign(const uint8_t *p_data, uint32_t data_size, sgx_ec256_private_t *p_private, sgx_ec256_signature_t *p_signature, sgx_ecc_state_handle_t ecc_handle); /** Verifies the signature for the given data based on the public key. * * A digital signature over a message consists of a pair of large numbers, 256-bits each, * which could be created by function: sgx_ecdsa_sign. The scheme used for computing a * digital signature is of the ECDSA scheme, an elliptic curve of the DSA scheme. * * The typical result of the digital signature verification is one of the two values: * SGX_Generic_ECValid - Digital signature is valid * SGX_Generic_ECInvalidSignature - Digital signature is not valid * * The elliptic curve domain parameters must be created by function: * sgx_ecc256_open_context * * Return: If context, public key, signature, result or data pointer is NULL, * SGX_ERROR_INVALID_PARAMETER is returned. * If the verification process fails then SGX_ERROR_UNEXPECTED is returned. * Parameters: * Return: sgx_status_t - SGX_SUCCESS or failure as defined in sgx_error.h * Inputs: sgx_ecc_state_handle_t ecc_handle - Handle to the ECC crypto system * sgx_ec256_public_t *p_public - Pointer to the public key * uint8_t *p_data - Pointer to the data to be signed * uint32_t data_size - Size of the data to be signed * sgx_ec256_signature_t *p_signature - Pointer to the signature * Output: uint8_t *p_result - Pointer to the result of verification check */ sgx_status_t SGXAPI sgx_ecdsa_verify(const uint8_t *p_data, uint32_t data_size, const sgx_ec256_public_t *p_public, sgx_ec256_signature_t *p_signature, uint8_t *p_result, sgx_ecc_state_handle_t ecc_handle); #ifdef __cplusplus } #endif #endif