r14181@tombo: nickm | 2008-02-15 16:48:17 -0500

 Fix all but 2 DOCDOC items; defer many XXX020s (particularly those where fixing them would fix no bugs at the risk of introducing some bugs).


svn:r13529

src/common/compat.h

@@ -340,7 +340,7 @@ typedef struct tor_addr_t
   } addr;
 } tor_addr_t;
 
-/* XXXX020 rename these. */
+/* XXXX021 rename these. */
 static INLINE uint32_t IPV4IP(const tor_addr_t *a);
 static INLINE uint32_t IPV4IPh(const tor_addr_t *a);
 static INLINE uint32_t IPV4MAPh(const tor_addr_t *a);

src/or/buffers.c

@@ -119,10 +119,8 @@ typedef struct chunk_freelist_t {
 
 /** Static array of freelists, sorted by alloc_len, terminated by an entry
  * with alloc_size of 0. */
-/**XXXX020 tune these values.  And all allocation sizes, really. */
 static chunk_freelist_t freelists[] = {
-  FL(256, 1024, 16), FL(512, 1024, 16), FL(1024, 512, 8), FL(4096, 256, 8),
-  FL(8192, 128, 4), FL(16384, 64, 4), FL(32768, 32, 2), FL(65536, 16, 2),
+  FL(4096, 256, 8), FL(8192, 128, 4), FL(16384, 64, 4), FL(32768, 32, 2),
   FL(0, 0, 0)
 };
 #undef FL
@@ -180,7 +178,7 @@ chunk_new_with_alloc_size(size_t alloc)
       freelist->lowest_length = freelist->cur_length;
     ++freelist->n_hit;
   } else {
-    /* XXXX020 take advantage of tor_malloc_roundup, once we know how that
+    /* XXXX021 take advantage of tor_malloc_roundup, once we know how that
      * affects freelists. */
     if (freelist)
       ++freelist->n_alloc;
@@ -244,8 +242,6 @@ chunk_grow(chunk_t *chunk, size_t sz)
 static INLINE size_t
 preferred_chunk_size(size_t target)
 {
-  /* XXXX020 use log2 code, maybe. */
-  /* XXXX020 or make sizing code more fine-grained! */
   size_t sz = MIN_CHUNK_ALLOC;
   while (CHUNK_SIZE_WITH_ALLOC(sz) < target) {
     sz <<= 1;
@@ -418,10 +414,7 @@ buf_pullup(buf_t *buf, size_t bytes, int nulterminate)
 }
 
 /** Resize buf so it won't hold extra memory that we haven't been
- * using lately (that is, since the last time we called buf_shrink).
- * Try to shrink the buf until it is the largest factor of two that
- * can contain <b>buf</b>-&gt;highwater, but never smaller than
- * MIN_LAZY_SHRINK_SIZE.
+ * using lately.
  */
 void
 buf_shrink(buf_t *buf)
@@ -454,8 +447,8 @@ buf_remove_from_front(buf_t *buf, size_t n)
   check();
 }
 
-/** Create and return a new buf with capacity <b>size</b>.
- * (Used for testing). */
+/** Create and return a new buf with default chunk capacity <b>size</b>.
+ */
 buf_t *
 buf_new_with_capacity(size_t size)
 {
@@ -609,11 +602,11 @@ read_to_chunk_tls(buf_t *buf, chunk_t *chunk, tor_tls_t *tls,
  * (because of EOF), set *<b>reached_eof</b> to 1 and return 0. Return -1 on
  * error; else return the number of bytes read.
  */
-/* XXXX020 indicate "read blocked" somehow? */
+/* XXXX021 indicate "read blocked" somehow? */
 int
 read_to_buf(int s, size_t at_most, buf_t *buf, int *reached_eof)
 {
-  /* XXXX020 It's stupid to overload the return values for these functions:
+  /* XXXX021 It's stupid to overload the return values for these functions:
    * "error status" and "number of bytes read" are not mutually exclusive.
    */
   int r = 0;
@@ -777,7 +770,7 @@ flush_chunk_tls(tor_tls_t *tls, buf_t *buf, chunk_t *chunk,
 int
 flush_buf(int s, buf_t *buf, size_t sz, size_t *buf_flushlen)
 {
-  /* XXXX020 It's stupid to overload the return values for these functions:
+  /* XXXX021 It's stupid to overload the return values for these functions:
    * "error status" and "number of bytes flushed" are not mutually exclusive.
    */
   int r;

src/or/circuitlist.c

@@ -806,7 +806,7 @@ origin_circuit_t *
 circuit_find_to_cannibalize(uint8_t purpose, extend_info_t *info,
                             int flags)
 {
-  /*XXXX020 arma: The purpose argument is ignored.  Can that possibly be
+  /*XXXX021 arma: The purpose argument is ignored.  Can that possibly be
    * right? */
   /* XXXX <arma> i don't know of any actual bugs that this causes. since i
    * think we only call the function for purposes where we want it to do what

src/or/connection_edge.c

@@ -925,9 +925,12 @@ client_dns_set_reverse_addressmap(const char *address, const char *v,
  *
  * These options are configured by parse_virtual_addr_network().
  */
-/*DOCDOC options */
+/** Which network should we use for virtual IPv4 addresses?  Only the first
+ * bits of this value are fixed. */
 static uint32_t virtual_addr_network = 0x7fc00000u;
+/** How many bits of <b>virtual_addr_network</b> are fixed? */
 static maskbits_t virtual_addr_netmask_bits = 10;
+/** What's the next virtual address we will hand out? */
 static uint32_t next_virtual_addr    = 0x7fc00000u;
 
 /** Read a netmask of the form 127.192.0.0/10 from "val", and check whether
@@ -1944,7 +1947,7 @@ connection_ap_handshake_send_resolve(edge_connection_t *ap_conn)
     uint32_t a;
     size_t len = strlen(ap_conn->socks_request->address);
     char c = 0;
-    /* XXXX020 This logic is a little ugly: we check for an in-addr.arpa ending
+    /* XXXX021 This logic is a little ugly: we check for an in-addr.arpa ending
      * on the address.  If we have one, the address is already in the right
      * order, so we'll leave it alone later.  Otherwise, we reverse it and
      * turn it into an in-addr.arpa address. */
@@ -1958,11 +1961,11 @@ connection_ap_handshake_send_resolve(edge_connection_t *ap_conn)
       return -1;
     }
     if (c) {
-      /* this path happens on DNS. Can we unify? XXXX020 */
+      /* this path happens on DNS. Can we unify? XXXX021 */
       ap_conn->socks_request->address[len-13] = c;
       strlcpy(inaddr_buf, ap_conn->socks_request->address, sizeof(inaddr_buf));
     } else {
-      /* this path happens on tor-resolve. Can we unify? XXXX020 */
+      /* this path happens on tor-resolve. Can we unify? XXXX021 */
       a = ntohl(in.s_addr);
       tor_snprintf(inaddr_buf, sizeof(inaddr_buf), "%d.%d.%d.%d.in-addr.arpa",
                    (int)(uint8_t)((a    )&0xff),
@@ -2085,12 +2088,15 @@ tell_controller_about_resolved_result(edge_connection_t *conn,
   }
 }
 
-/** Send an answer to an AP connection that has requested a DNS lookup
- * via SOCKS.  The type should be one of RESOLVED_TYPE_(IPV4|IPV6|HOSTNAME) or
- * -1 for unreachable; the answer should be in the format specified
- * in the socks extensions document.
- * DOCDOC ttl expires
+/** Send an answer to an AP connection that has requested a DNS lookup via
+ * SOCKS.  The type should be one of RESOLVED_TYPE_(IPV4|IPV6|HOSTNAME) or -1
+ * for unreachable; the answer should be in the format specified in the socks
+ * extensions document.  <b>ttl</b> is the ttl for the answer, or -1 on
+ * certain errors or for values that didn't come via DNS.  <b>expires</b> is
+ * a time when the answer expires, or -1 or TIME_MAX if there's a good TTL.
  **/
+/* XXXX021 the use of the ttl and expires fields is nutty.  Let's make this
+ * interface and those that use it less ugly. */
 void
 connection_ap_handshake_socks_resolved(edge_connection_t *conn,
                                        int answer_type,
@@ -2341,7 +2347,9 @@ connection_exit_begin_conn(cell_t *cell, circuit_t *circ)
       address = tor_strdup(or_circ->p_conn->_base.address);
     else
       address = tor_strdup("127.0.0.1");
-    port = 1; /*XXXX020 set this to something sensible?  - NM*/
+    port = 1; /* XXXX This value is never actually used anywhere, and there
+               * isn't "really" a connection here.  But we
+               * need to set it to something nonzero. */
   } else {
     log_warn(LD_BUG, "Got an unexpected command %d", (int)rh.command);
     end_payload[0] = END_STREAM_REASON_INTERNAL;

src/or/connection_or.c

@@ -404,7 +404,7 @@ connection_or_init_conn_from_address(or_connection_t *conn,
       /* Override the addr/port, so our log messages will make sense.
        * This is dangerous, since if we ever try looking up a conn by
        * its actual addr/port, we won't remember. Careful! */
-      /* XXXX020 arma: this is stupid, and it's the reason we need real_addr
+      /* XXXX021 arma: this is stupid, and it's the reason we need real_addr
        * to track is_canonical properly.  What requires it? */
       /* XXXX <arma> i believe the reason we did this, originally, is because
        * we wanted to log what OR a connection was to, and if we logged the

src/or/dnsserv.c

@@ -227,7 +227,7 @@ dnsserv_resolved(edge_connection_t *conn,
   if (!req)
     return;
 
-  /* XXXX020 Re-do; this is dumb. */
+  /* XXXX021 Re-do; this is dumb. */
   if (ttl < 60)
     ttl = 60;
 

src/or/eventdns.c

@@ -1829,7 +1829,7 @@ server_port_free(struct evdns_server_port *port)
 	}
 	(void) event_del(&port->event);
 	CLEAR(&port->event);
-	/* XXXX020 actually free the port? -NM */
+	/* XXXX021 actually free the port? -NM */
 	/* XXXX yes, and fix up evdns_close_server_port to dtrt. -NM */
 }
 

src/or/or.h

@@ -882,7 +882,7 @@ typedef struct connection_t {
   /** Annother connection that's connected to this one in lieu of a socket. */
   struct connection_t *linked_conn;
 
-  /* XXXX020 move this into a subtype!!! */
+  /* XXXX021 move this into a subtype. */
   struct evdns_server_port *dns_server_port;
 
 } connection_t;

src/or/rephist.c

@@ -311,7 +311,8 @@ rep_hist_note_router_unreachable(const char *id, time_t when)
   if (!started_tracking_stability)
     started_tracking_stability = time(NULL);
   if (hist && hist->start_of_run) {
-    /*XXXX020 treat failure specially? */
+    /*XXXX We could treat failed connections differently from failed
+     * conect attempts. */
     long run_length = when - hist->start_of_run;
     hist->weighted_run_length += run_length;
     hist->total_run_weights += 1.0;
@@ -388,7 +389,8 @@ get_stability(or_history_t *hist, time_t when)
   return total / total_weights;
 }
 
-/** DODDOC */
+/** Return the total amount of time we've been observing, with each run of
+ * time downrated by the appropriate factor. */
 static long
 get_total_weighted_time(or_history_t *hist, time_t when)
 {
@@ -464,7 +466,7 @@ rep_hist_get_weighted_time_known(const char *id, time_t when)
 int
 rep_hist_have_measured_enough_stability(void)
 {
-  /* XXXX020 This doesn't do so well when we change our opinion
+  /* XXXX021 This doesn't do so well when we change our opinion
    * as to whether we're tracking router stability. */
   return started_tracking_stability < time(NULL) - 4*60*60;
 }
@@ -755,7 +757,11 @@ parse_possibly_bad_iso_time(const char *s, time_t *time_out)
     return parse_iso_time(s, time_out);
 }
 
-/** DOCDOC */
+/** We've read a time <b>t</b> from a file stored at <b>stored_at</b>, which
+ * says we started measuring at <b>started_measuring</b>.  Return a new number
+ * that's about as much before <b>now</b> as <b>t</b> was before
+ * <b>stored_at</b>.
+ */
 static INLINE time_t
 correct_time(time_t t, time_t now, time_t stored_at, time_t started_measuring)
 {
@@ -868,7 +874,6 @@ rep_hist_load_mtbf_data(time_t now)
     wfu_timebuf[0] = '\0';
 
     if (format == 1) {
-      /* XXXX020 audit the heck out of my scanf usage. */
       n = sscanf(line, "%40s %ld %lf S=%10s %8s",
                  hexbuf, &wrl, &trw, mtbf_timebuf, mtbf_timebuf+11);
       if (n != 3 && n != 5) {

src/or/routerlist.c

@@ -1388,16 +1388,14 @@ get_max_believable_bandwidth(void)
  * If <b>statuses</b> is zero, then <b>sl</b> is a list of
  * routerinfo_t's. Otherwise it's a list of routerstatus_t's.
  *
- * If <b>for_exit</b>, we're picking an exit node: consider all nodes'
- * bandwidth equally regardless of their Exit status, since there may be
- * some in the list because they exit to obscure ports. If not <b>for_exit</b>,
- * we're picking a non-exit node: weight exit-node's bandwidth less
- * depending on the smallness of the fraction of Exit-to-total bandwidth.
- *
- * If <b>for_guard</b>, we're picking a guard node: consider all guard's
- * bandwidth equally. Otherwise, weight guards proportionally less.
- *
- * XXX DOCDOC the above args aren't args anymore
+ * If <b>rule</b>==WEIGHT_FOR_EXIT. we're picking an exit node: consider all
+ * nodes' bandwidth equally regardless of their Exit status, since there may
+ * be some in the list because they exit to obscure ports. If
+ * <b>rule</b>==NO_WEIGHTING, we're picking a non-exit node: weight
+ * exit-node's bandwidth less depending on the smallness of the fraction of
+ * Exit-to-total bandwidth.  If <b>rule</b>==WEIGHT_FOR_GUARD, we're picking a
+ * guard node: consider all guard's bandwidth equally. Otherwise, weight
+ * guards proportionally less.
  */
 static void *
 smartlist_choose_by_bandwidth(smartlist_t *sl, bandwidth_weight_rule_t rule,
@@ -3666,7 +3664,7 @@ launch_router_descriptor_downloads(smartlist_t *downloadable, time_t now)
       }
     }
   }
-  /* XXX020 should we consider having even the dir mirrors delay
+  /* XXX should we consider having even the dir mirrors delay
    * a little bit, so we don't load the authorities as much? -RD
    * I don't think so.  If we do, clients that want those descriptors may
    * not actually find them if the caches haven't got them yet. -NM