break the quickstart into INSTALL

remove the old useless generic INSTALL


svn:r547

INSTALL

@@ -1,231 +1,27 @@
-Copyright 1994, 1995, 1996, 1999, 2000, 2001 Free Software Foundation,
-Inc.
-
-   This file is free documentation; the Free Software Foundation gives
-unlimited permission to copy, distribute and modify it.
-
-Basic Installation
-==================
-
-   These are generic installation instructions.
-
-   The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation.  It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions.  Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
-
-   It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring.  (Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.)
-
-   If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release.  If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
-may remove or edit it.
-
-   The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'.  You only need
-`configure.ac' if you want to change it or regenerate `configure' using
-a newer version of `autoconf'.
-
-The simplest way to compile this package is:
-
-  1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.  If you're
-     using `csh' on an old version of System V, you might need to type
-     `sh ./configure' instead to prevent `csh' from trying to execute
-     `configure' itself.
-
-     Running `configure' takes awhile.  While running, it prints some
-     messages telling which features it is checking for.
-
-  2. Type `make' to compile the package.
-
-  3. Optionally, type `make check' to run any self-tests that come with
-     the package.
-
-  4. Type `make install' to install the programs and any data files and
-     documentation.
-
-  5. You can remove the program binaries and object files from the
-     source code directory by typing `make clean'.  To also remove the
-     files that `configure' created (so you can compile the package for
-     a different kind of computer), type `make distclean'.  There is
-     also a `make maintainer-clean' target, but that is intended mainly
-     for the package's developers.  If you use it, you may have to get
-     all sorts of other programs in order to regenerate files that came
-     with the distribution.
-
-Compilers and Options
-=====================
-
-   Some systems require unusual options for compilation or linking that
-the `configure' script does not know about.  Run `./configure --help'
-for details on some of the pertinent environment variables.
-
-   You can give `configure' initial values for variables by setting
-them in the environment.  You can do that on the command line like this:
-
-     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
-
-   *Note Defining Variables::, for more details.
-
-Compiling For Multiple Architectures
-====================================
-
-   You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory.  To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'.  `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script.  `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
-
-   If you have to use a `make' that does not support the `VPATH'
-variable, you have to compile the package for one architecture at a
-time in the source code directory.  After you have installed the
-package for one architecture, use `make distclean' before reconfiguring
-for another architecture.
-
-Installation Names
-==================
-
-   By default, `make install' will install the package's files in
-`/usr/local/bin', `/usr/local/man', etc.  You can specify an
-installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PATH'.
-
-   You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files.  If you
-give `configure' the option `--exec-prefix=PATH', the package will use
-PATH as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
-
-   In addition, if you use an unusual directory layout you can give
-options like `--bindir=PATH' to specify different values for particular
-kinds of files.  Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.
-
-   If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-Optional Features
-=================
-
-   Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System).  The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
-   For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-Specifying the System Type
-==========================
-
-   There may be some features `configure' cannot figure out
-automatically, but needs to determine by the type of host the package
-will run on.  Usually `configure' can figure that out, but if it prints
-a message saying it cannot guess the host type, give it the
-`--build=TYPE' option.  TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
-
-     CPU-COMPANY-SYSTEM
-
-where SYSTEM can have one of these forms:
-
-     OS KERNEL-OS
-
-   See the file `config.sub' for the possible values of each field.  If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the host type.
-
-   If you are _building_ compiler tools for cross-compiling, you should
-use the `--target=TYPE' option to select the type of system they will
-produce code for.
-
-   If you want to _use_ a cross compiler, that generates code for a
-platform different from the build platform, you should specify the host
-platform (i.e., that on which the generated programs will eventually be
-run) with `--host=TYPE'.  In this case, you should also specify the
-build platform with `--build=TYPE', because, in this case, it may not
-be possible to guess the build platform (it sometimes involves
-compiling and running simple test programs, and this can't be done if
-the compiler is a cross compiler).
-
-Sharing Defaults
-================
-
-   If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists.  Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Defining Variables
-==================
-
-   Variables not defined in a site shell script can be set in the
-environment passed to `configure'.  However, some packages may run
-configure again during the build, and the customized values of these
-variables may be lost.  In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'.  For example:
-
-     ./configure CC=/usr/local2/bin/gcc
-
-will cause the specified gcc to be used as the C compiler (unless it is
-overridden in the site shell script).
-
-`configure' Invocation
-======================
-
-   `configure' recognizes the following options to control how it
-operates.
-
-`--help'
-`-h'
-     Print a summary of the options to `configure', and exit.
-
-`--version'
-`-V'
-     Print the version of Autoconf used to generate the `configure'
-     script, and exit.
-
-`--cache-file=FILE'
-     Enable the cache: use and save the results of the tests in FILE,
-     traditionally `config.cache'.  FILE defaults to `/dev/null' to
-     disable caching.
-
-`--config-cache'
-`-C'
-     Alias for `--cache-file=config.cache'.
-
-`--quiet'
-`--silent'
-`-q'
-     Do not print messages saying which checks are being made.  To
-     suppress all normal output, redirect it to `/dev/null' (any error
-     messages will still be shown).
-
-`--srcdir=DIR'
-     Look for the package's source code in directory DIR.  Usually
-     `configure' can determine that directory automatically.
-
-`configure' also accepts some other, not widely useful, options.  Run
-`configure --help' for more details.
+Quickstart version for users:
+
+0) Download the absolute newest version. No, really.
+  http://freehaven.net/tor/
+1) tar xvf it, and then cd into the directory.
+2) ./configure (or do the two-line version in the README, if you're on bsd)
+3) make
+4) cd src/config
+5) ../or/tor -f oprc
+  You don't need to run this as root, and you probably shouldn't.
+6) point your browser to socks4 or socks5 proxy at localhost port
+  9050. In mozilla, this is in edit|preferences|advanced|proxies. This
+  allows you to test to make sure tor is installed correctly.
+7) make sure you've set it up correctly: go to
+  http://www.junkbusters.com/cgi-bin/privacy and see what IP it says
+  you're coming from. If it works, you should probably go on to step 8,
+  to get better privacy.
+
+8) Optionally, install privoxy (www.privoxy.org), and add the line
+  "forward-socks4a / localhost:9050 ." (without the quotes) to its config
+  file. Then change your mozilla to http proxy at localhost port 8118 (and
+  no socks proxy). This step will give you good html scrubbing as well.
+  (See doc/CLIENTS for why direct socks gives you less anonymity.)
+
+If this works for you, you can stop reading. Otherwise, see the README for
+more details.
 

README

@@ -1,3 +1,4 @@
+
 'tor' is an implementation of The Onion Routing system, as
 described in a bit more detail at http://www.onion-router.net/. You
 can read list archives, and subscribe to the mailing list, at
@@ -6,36 +7,12 @@ http://archives.seul.org/or/dev/.
 Is your question in the FAQ? Should it be?
 
 **************************************************************************
-
-Quickstart version for users:
-
-0) Download the absolute newest version. No, really.
-  http://freehaven.net/tor/ (unfortunately they're all unreadable now,
-  so you must skip this step)
-1) tar xvf it, and then cd into the directory.
-2) ./configure (or do the two-line version below, if you're on bsd)
-3) make
-4) cd src/config
-5) ../or/tor -f oprc
-  You don't need to run this as root, and you probably shouldn't.
-6) point your browser to socks4 proxy at localhost port 9050. In mozilla,
-  this is in edit|preferences|advanced|proxies. This allows you to test
-  to make sure tor is installed correctly.
-7) make sure you've set it up correctly: go to
-  http://www.junkbusters.com/cgi-bin/privacy and see what IP it says
-  you're coming from. If it works, you should probably go on to step 8,
-  to get better privacy.
-
-8) Optionally, install privoxy (www.privoxy.org), and add the line
-  "forward-socks4a / localhost:9050 ." (without the quotes) to its config
-  file. Then change your mozilla to http proxy at localhost port 8118 (and
-  no socks proxy). This step will give you good html scrubbing as well.
-
-If this works for you, you can stop reading. Otherwise, below is a more
-detailed version.
+See the INSTALL file for a quickstart. This is all you will probably need.
+**************************************************************************
 
 **************************************************************************
-You only need to look beyond this point if the above doesn't work for you.
+You only need to look beyond this point if the quickstart in the INSTALL
+doesn't work for you.
 **************************************************************************
 
 Dependencies:
@@ -73,20 +50,7 @@ Do you want to run a tor server?
   be able to authenticate to the other tor nodes until I've added you
   to the directory.
 
-How to use it for web browsing:
-
-  Download privoxy (www.privoxy.org). Install it. Add the following
-  line to your 'config' file (it might be in /etc/privoxy/config) :
-    forward-socks4a / localhost:9050 .
-  Don't forget the . at the end.
-
-  From here, you can point your browser/etc to localhost port 8118 (as
-  an http proxy) and your traffic will go through Privoxy, then through
-  the onion proxy, to the onion routing network.
-
-  You can also ignore the whole privoxy thing and set your Mozilla to
-  use localhost 9050 directly as a socks4 server. But see doc/CLIENTS
-  for why this may not give you the anonymity you want.
+Command-line web browsing:
 
   For more convenient command-line use, I recommend making a ~/.wgetrc
   with the line