r12654@Kushana: nickm | 2007-03-25 19:03:44 -0400

 Add documentation for cell queue functions; make destroy cells result in cell queues getting cleared before the destroy gets sent.


svn:r9907

src/or/circuitlist.c

@@ -71,7 +71,12 @@ HT_GENERATE(orconn_circid_map, orconn_circid_circuit_map_t, node,
  */
 orconn_circid_circuit_map_t *_last_circid_orconn_ent = NULL;
 
-/** DOCDOC */
+/** Implementation helper for circuit_set_{p,n}_circid_orconn: A circuit ID
+ * and/or or_connection for circ has just changed from <b>old_conn, old_id</b>
+ * to <b>conn, id</b>.  Adjust the conn,circid map as appropriate, removing
+ * the old entry (if any) and adding a new one.  If If <b>active</b> is true,
+ * remove the circuit from the list of active circuits on old_conn and add it
+ * to the list of active circuits on conn. */
 static void
 circuit_set_circid_orconn_helper(circuit_t *circ, uint16_t id,
                                  or_connection_t *conn,

src/or/connection_or.c

@@ -231,10 +231,12 @@ connection_or_process_inbuf(or_connection_t *conn)
   }
 }
 
-/**DOCDOC*/
+/** When adding cells to an OR connection's outbuf, keep adding until the
+ * outbuf is at least this long, or we run out of cells. */
 #define OR_CONN_HIGHWATER (32*1024)
 
-/**DOCDOC*/
+/** Add cells to an OR connection's outbuf whenever the outbuf's data length
+ * drops below this size. */
 #define OR_CONN_LOWWATER (16*1024)
 
 /** Called whenever we have flushed some data on an or_conn: add more data
@@ -243,8 +245,11 @@ int
 connection_or_flushed_some(or_connection_t *conn)
 {
   size_t datalen = buf_datalen(conn->_base.outbuf);
+  /* If we're under the low water mark, add cells until we're just over the
+   * high water mark. */
   if (datalen < OR_CONN_LOWWATER) {
-    int n = (OR_CONN_HIGHWATER - datalen) / CELL_NETWORK_SIZE;
+    int n = (OR_CONN_HIGHWATER - datalen + CELL_NETWORK_SIZE-1)
+      / CELL_NETWORK_SIZE;
     while (conn->active_circuits && n > 0) {
       int flushed = connection_or_flush_from_first_active_circuit(conn, 1);
       n -= flushed;
@@ -726,8 +731,9 @@ connection_tls_finish_handshake(or_connection_t *conn)
   return 0;
 }
 
-/** Pack <b>cell</b> into wire-format, and write it onto <b>conn</b>'s
- * outbuf.
+/** Pack <b>cell</b> into wire-format, and write it onto <b>conn</b>'s outbuf.
+ * For cells that use or affect a circuit, this should only be called by
+ * connection_or_flush_from_first_active_circuit()
  */
 void
 connection_or_write_cell_to_buf(const cell_t *cell, or_connection_t *conn)
@@ -786,6 +792,7 @@ int
 connection_or_send_destroy(uint16_t circ_id, or_connection_t *conn, int reason)
 {
   cell_t cell;
+  circuit_t *circ;
 
   tor_assert(conn);
 
@@ -794,7 +801,12 @@ connection_or_send_destroy(uint16_t circ_id, or_connection_t *conn, int reason)
   cell.command = CELL_DESTROY;
   cell.payload[0] = (uint8_t) reason;
   log_debug(LD_OR,"Sending destroy (circID %d).", circ_id);
-  /* XXXX clear the rest of the cell queue on the circuit. {cells} */
+
+  /* Clear the cell queue on the circuit, so that our destroy cell will
+   * be the very next thing written.*/
+  circ = circuit_get_by_circid_orconn(circ_id, conn);
+  circuit_clear_cell_queue(circ, conn);
+
   connection_or_write_cell_to_buf(&cell, conn);
   return 0;
 }

src/or/or.h

@@ -685,11 +685,12 @@ struct cell_t {
   char payload[CELL_PAYLOAD_SIZE]; /**< Cell body. */
 };
 
-/** DOCDOC */
+/** A queue of cells on a circuit, waiting to be added to the
+ * or_connection_t's outbuf. */
 typedef struct cell_queue_t {
-  cell_t *head;
-  cell_t *tail;
-  int n;
+  cell_t *head; /**< The first cell, or NULL if the queue is empty */
+  cell_t *tail; /**< The last cell, or NULL if the queue is empty */
+  int n; /**< The number of cells in the queue */
 } cell_queue_t;
 
 /** Beginning of a RELAY cell payload. */
@@ -754,14 +755,17 @@ typedef struct connection_t {
                          * connections.  Set once we've set the stream end,
                          * and check in connection_about_to_close_connection().
                          */
-  unsigned int edge_blocked_on_circ:1; /**< DOCDOC */
+  /** Edge connections only: true if we've blocked writing until the
+   * circuit has fewer queued cells. */
+  unsigned int edge_blocked_on_circ:1;
   /** Used for OR conns that shouldn't get any new circs attached to them. */
   unsigned int or_is_obsolete:1;
   /** For AP connections only. If 1, and we fail to reach the chosen exit,
    * stop requiring it. */
   unsigned int chosen_exit_optional:1;
 
-  int s; /**< Our socket; -1 if this connection is closed. */
+  int s; /**< Our socket; -1 if this connection is closed, or has no
+          * sockets. */
   int conn_array_index; /**< Index into the global connection array. */
   struct event *read_event; /**< Libevent event structure. */
   struct event *write_event; /**< Libevent event structure. */
@@ -816,7 +820,11 @@ typedef struct or_connection_t {
                     * bandwidthburst. (OPEN ORs only) */
   int n_circuits; /**< How many circuits use this connection as p_conn or
                    * n_conn ? */
-  struct circuit_t *active_circuits; /**< DOCDOC */
+
+  /** Double-linked ring of circuits with queued cells waiting for room to
+   * free up on this connection's outbuf.  Every time we pull cells from a
+   * circuit, we advance this pointer to the next circuit in the ring. */
+  struct circuit_t *active_circuits;
   struct or_connection_t *next_with_same_id; /**< Next connection with same
                                               * identity digest as this one. */
 
@@ -1366,7 +1374,7 @@ typedef struct circuit_t {
   uint32_t magic; /**< For memory and type debugging: must equal
                    * ORIGIN_CIRCUIT_MAGIC or OR_CIRCUIT_MAGIC. */
 
-  /** DOCDOC */
+  /** Queue of cells waiting to be transmitted on n_conn. */
   cell_queue_t n_conn_cells;
   /** The OR connection that is next in this circuit. */
   or_connection_t *n_conn;
@@ -1379,8 +1387,11 @@ typedef struct circuit_t {
   /** The IPv4 address of the OR that is next in this circuit. */
   uint32_t n_addr;
 
-  /** DOCDOC */
+  /** True iff we are waiting for n_conn_cells to become less full before
+   * allowing p_streams to add any more cells. (Origin circuit only.) */
   unsigned int streams_blocked_on_n_conn : 1;
+  /** True iff we are waiting for p_conn_cells to become less full before
+   * allowing n_streams to add any more cells. (OR circuit only.) */
   unsigned int streams_blocked_on_p_conn : 1;
 
   /** How many relay data cells can we package (read from edge streams)
@@ -1412,9 +1423,13 @@ typedef struct circuit_t {
   const char *marked_for_close_file; /**< For debugging: in which file was this
                                       * circuit marked for close? */
 
-  struct circuit_t *next_active_on_n_conn; /**< DOCDOC */
-  struct circuit_t *prev_active_on_n_conn; /**< DOCDOC */
-  struct circuit_t *next; /**< Next circuit in linked list. */
+  /** Next circuit in the doubly-linked ring of circuits waiting to add
+   * cells to n_conn.  NULL if we have no cells pending. */
+  struct circuit_t *next_active_on_n_conn;
+  /** Previous circuit in the doubly-linked ring of circuits waiting to add
+   * cells to n_conn.  NULL if we have no cells pending. */
+  struct circuit_t *prev_active_on_n_conn;
+  struct circuit_t *next; /**< Next circuit in linked list of all circuits. */
 } circuit_t;
 
 /** An origin_circuit_t holds data necessary to build and use a circuit.
@@ -1468,12 +1483,16 @@ typedef struct origin_circuit_t {
 typedef struct or_circuit_t {
   circuit_t _base;
 
-  struct circuit_t *next_active_on_p_conn; /**< DOCDOC */
-  struct circuit_t *prev_active_on_p_conn; /**< DOCDOC */
+  /** Next circuit in the doubly-linked ring of circuits waiting to add
+   * cells to p_conn.  NULL if we have no cells pending. */
+  struct circuit_t *next_active_on_p_conn;
+  /** Previous circuit in the doubly-linked ring of circuits waiting to add
+   * cells to p_conn.  NULL if we have no cells pending. */
+  struct circuit_t *prev_active_on_p_conn;
 
   /** The circuit_id used in the previous (backward) hop of this circuit. */
   circid_t p_circ_id;
-  /** DOCDOC */
+  /** Queue of cells waiting to be transmitted on p_conn. */
   cell_queue_t p_conn_cells;
   /** The OR connection that is previous in this circuit. */
   or_connection_t *p_conn;
@@ -2648,6 +2667,7 @@ int connection_or_flush_from_first_active_circuit(or_connection_t *conn,
 void assert_active_circuits_ok(or_connection_t *orconn);
 void make_circuit_inactive_on_conn(circuit_t *circ, or_connection_t *conn);
 void make_circuit_active_on_conn(circuit_t *circ, or_connection_t *conn);
+void circuit_clear_cell_queue(circuit_t *circ, or_connection_t *orconn);
 
 /********************************* rephist.c ***************************/
 

src/or/relay.c

@@ -131,15 +131,16 @@ relay_crypt_one_payload(crypto_cipher_env_t *cipher, char *in,
 }
 
 /** Receive a relay cell:
- *  - Crypt it (encrypt APward, decrypt at AP, decrypt exitward).
+ *  - Crypt it (encrypt if headed toward the origin or if we <b>are</b> the
+ *    origin; decrypt if we're headed toward the exit).
  *  - Check if recognized (if exitward).
- *  - If recognized and the digest checks out, then find if there's
- *    a conn that the cell is intended for, and deliver it to
+ *  - If recognized and the digest checks out, then find if there's a stream
+ *    that the cell is intended for, and deliver it to the right
  *    connection_edge.
- *  - Else connection_or_write_cell_to_buf to the conn on the other
- *    side of the circuit.DOCDOC
+ *  - If not recognized, then we need to relay it: append it to the appropriate
+ *    cell_queue on <b>circ</b>.
  *
- * Return -reason on failure.
+ * Return -<b>reason</b> on failure.
  */
 int
 circuit_receive_relay_cell(cell_t *cell, circuit_t *circ, int cell_direction)
@@ -322,7 +323,7 @@ relay_crypt(circuit_t *circ, cell_t *cell, int cell_direction,
 
 /** Package a relay cell from an edge:
  *  - Encrypt it to the right layer
- *  - connection_or_write_cell_to_buf to the right conn DOCDOC
+ *  - Append it to the appropriate cell_queue on <b>circ</b>
  */
 static int
 circuit_package_relay_cell(cell_t *cell, circuit_t *circ,
@@ -1462,19 +1463,21 @@ circuit_consider_sending_sendme(circuit_t *circ, crypt_path_t *layer_hint)
   }
 }
 
-/** DOCDOC */
+/** Stop reading on edge connections when we have this many cells
+ * waiting on the appropriate queue. */
 #define CELL_QUEUE_HIGHWATER_SIZE 256
- /** DOCDOC */
+/** Start reading from edge connections again when we get down to this many
+ * cells. */
 #define CELL_QUEUE_LOWWATER_SIZE 64
 
-/** DOCDOC */
+/** Release storage held by <b>cell</b> */
 static INLINE void
 cell_free(cell_t *cell)
 {
   tor_free(cell);
 }
 
-/** DOCDOC */
+/** Allocate a new copy of <b>cell</b>. */
 static INLINE cell_t *
 cell_copy(const cell_t *cell)
 {
@@ -1484,7 +1487,7 @@ cell_copy(const cell_t *cell)
   return c;
 }
 
-/** DOCDOC */
+/** Append <b>cell</b> to the end of <b>queue</b>. */
 void
 cell_queue_append(cell_queue_t *queue, cell_t *cell)
 {
@@ -1499,14 +1502,14 @@ cell_queue_append(cell_queue_t *queue, cell_t *cell)
   ++queue->n;
 }
 
-/** DOCDOC */
+/** Append a newly allocated copy of <b>cell</b> to the end of <b>queue</b> */
 void
 cell_queue_append_copy(cell_queue_t *queue, const cell_t *cell)
 {
   cell_queue_append(queue, cell_copy(cell));
 }
 
-/** DOCDOC */
+/** Remove and free every cell in <b>queue</b>. */
 void
 cell_queue_clear(cell_queue_t *queue)
 {
@@ -1521,7 +1524,8 @@ cell_queue_clear(cell_queue_t *queue)
   queue->n = 0;
 }
 
-/** DOCDOC */
+/** Extract and return the cell at the head of <b>queue</b>; return NULL if
+ * <b>queue</b> is empty. */
 static INLINE cell_t *
 cell_queue_pop(cell_queue_t *queue)
 {
@@ -1537,7 +1541,8 @@ cell_queue_pop(cell_queue_t *queue)
   return cell;
 }
 
-/** DOCDOC */
+/** Return a pointer to the "next_active_on_{n,p}_conn" pointer of <b>circ</b>,
+ * depending on whether <b>conn</b> matches n_conn or p_conn. */
 static INLINE circuit_t **
 next_circ_on_conn_p(circuit_t *circ, or_connection_t *conn)
 {
@@ -1550,7 +1555,8 @@ next_circ_on_conn_p(circuit_t *circ, or_connection_t *conn)
   }
 }
 
-/** DOCDOC */
+/** Return a pointer to the "prev_active_on_{n,p}_conn" pointer of <b>circ</b>,
+ * depending on whether <b>conn</b> matches n_conn or p_conn. */
 static INLINE circuit_t **
 prev_circ_on_conn_p(circuit_t *circ, or_connection_t *conn)
 {
@@ -1563,10 +1569,14 @@ prev_circ_on_conn_p(circuit_t *circ, or_connection_t *conn)
   }
 }
 
-/** DOCDOC */
+/** Add <b>circ</b> to the list of circuits with pending cells on
+ * <b>conn</b>. */
 void
 make_circuit_active_on_conn(circuit_t *circ, or_connection_t *conn)
 {
+  tor_assert(! *prev_circ_on_conn_p(circ, conn));
+  tor_assert(! *next_circ_on_conn_p(circ, conn));
+
   if (! conn->active_circuits) {
     conn->active_circuits = circ;
     *prev_circ_on_conn_p(circ, conn) = circ;
@@ -1581,13 +1591,16 @@ make_circuit_active_on_conn(circuit_t *circ, or_connection_t *conn)
   }
 }
 
-/** DOCDOC */
+/** Remove <b>circ</b> to the list of circuits with pending cells on
+ * <b>conn</b>. */
 void
 make_circuit_inactive_on_conn(circuit_t *circ, or_connection_t *conn)
 {
-  // XXXX add some assert.
   circuit_t *next = *next_circ_on_conn_p(circ, conn);
-  circuit_t *prev = *next_circ_on_conn_p(circ, conn);
+  circuit_t *prev = *prev_circ_on_conn_p(circ, conn);
+  tor_assert(*prev_circ_on_conn_p(next, conn) == circ);
+  tor_assert(*next_circ_on_conn_p(prev, conn) == circ);
+
   if (next == circ) {
     conn->active_circuits = NULL;
   } else {
@@ -1600,7 +1613,8 @@ make_circuit_inactive_on_conn(circuit_t *circ, or_connection_t *conn)
   *next_circ_on_conn_p(circ, conn) = NULL;
 }
 
-/** DOCDOC */
+/** Remove all circuits from the list of circuits with pending cells on
+ * <b>conn</b>. */
 void
 connection_or_unlink_all_active_circs(or_connection_t *orconn)
 {
@@ -1617,9 +1631,12 @@ connection_or_unlink_all_active_circs(or_connection_t *orconn)
   orconn->active_circuits = NULL;
 }
 
-/** DOCDOC */
+/** Block (if <b>block</b> is true) or unblock (if <b>block</b> is false)
+ * every edge connection that is using <b>circ</b> to write to <b>orconn</b>,
+ * and start or stop reading as appropriate. */
 static void
-block_streams_on_circ(circuit_t *circ, or_connection_t *orconn, int block)
+set_streams_blocked_on_circ(circuit_t *circ, or_connection_t *orconn,
+                            int block)
 {
   edge_connection_t *edge = NULL;
   if (circ->n_conn == orconn) {
@@ -1647,7 +1664,10 @@ block_streams_on_circ(circuit_t *circ, or_connection_t *orconn, int block)
   }
 }
 
-/** DOCDOC */
+/** Pull as many cells as possible (but no more than <b>max</b>) from the
+ * queue of the first active circuit on <b>conn</b>, and write then to
+ * <b>conn</b>-&gt;outbuf.  Return the number of cells written.  Advance
+ * the active circuit pointer to the next active circuit in the ring. */
 int
 connection_or_flush_from_first_active_circuit(or_connection_t *conn, int max)
 {
@@ -1674,9 +1694,12 @@ connection_or_flush_from_first_active_circuit(or_connection_t *conn, int max)
   }
   conn->active_circuits = *next_circ_on_conn_p(circ, conn);
 
+  /* Is the cell queue low enough to unblock all the streams that are waiting
+   * to write to this circuit? */
   if (streams_blocked && queue->n <= CELL_QUEUE_LOWWATER_SIZE)
-    block_streams_on_circ(circ, conn, 0); /* unblock streams */
+    set_streams_blocked_on_circ(circ, conn, 0); /* unblock streams */
 
+  /* Did we just ran out of cells on this queue? */
   if (queue->n == 0) {
     log_info(LD_GENERAL, "Made a circuit inactive.");
     make_circuit_inactive_on_conn(circ, conn);
@@ -1684,7 +1707,8 @@ connection_or_flush_from_first_active_circuit(or_connection_t *conn, int max)
   return n_flushed;
 }
 
-/** DOCDOC */
+/** Add <b>cell</b> to the queue of <b>circ</b> writing to <b>orconn</b>
+ * transmitting in <b>direction</b>. */
 void
 append_cell_to_circuit_queue(circuit_t *circ, or_connection_t *orconn,
                              cell_t *cell, int direction)
@@ -1702,8 +1726,10 @@ append_cell_to_circuit_queue(circuit_t *circ, or_connection_t *orconn,
 
   cell_queue_append_copy(queue, cell);
 
+  /* If we have too many cells on the circuit, we should stop reading from
+   * the edge streams for a while. */
   if (!streams_blocked && queue->n >= CELL_QUEUE_HIGHWATER_SIZE)
-    block_streams_on_circ(circ, orconn, 1); /* block streams */
+    set_streams_blocked_on_circ(circ, orconn, 1); /* block streams */
 
   if (queue->n == 1) {
     /* This was the first cell added to the queue.  We need to make this
@@ -1713,7 +1739,6 @@ append_cell_to_circuit_queue(circuit_t *circ, or_connection_t *orconn,
   }
 
   if (! buf_datalen(orconn->_base.outbuf)) {
-    /* XXXX Should this be a "<16K"? {cells} */
     /* There is no data at all waiting to be sent on the outbuf.  Add a
      * cell, so that we can notice when it gets flushed, flushed_some can
      * get called, and we can start putting more data onto the buffer then.
@@ -1723,7 +1748,29 @@ append_cell_to_circuit_queue(circuit_t *circ, or_connection_t *orconn,
   }
 }
 
-/** DOCDOC */
+/** Remove all the cells queued on <b>circ</b> for <b>orconn</b>. */
+void
+circuit_clear_cell_queue(circuit_t *circ, or_connection_t *orconn)
+{
+  cell_queue_t *queue;
+  int streams_blocked;
+  if (circ->n_conn == orconn) {
+    queue = &circ->n_conn_cells;
+    streams_blocked = circ->streams_blocked_on_n_conn;
+  } else {
+    or_circuit_t *orcirc = TO_OR_CIRCUIT(circ);
+    queue = &orcirc->p_conn_cells;
+    streams_blocked = circ->streams_blocked_on_p_conn;
+  }
+
+  if (queue->n)
+    make_circuit_inactive_on_conn(circ,orconn);
+
+  cell_queue_clear(queue);
+}
+
+/** Fail with an assert if the active circuits ring on <b>orconn</b> is
+ * corrupt.  */
 void
 assert_active_circuits_ok(or_connection_t *orconn)
 {