Set orport= for 4 of the 5 dir authorities; Fix getinfo ns/all; Fix seg

fault when starting a server without a fingerprint file present.


svn:r9261

ChangeLog

@@ -17,8 +17,8 @@ Changes in version 0.1.2.5-alpha - 2007-01-03
       located in the %appdata%\Tor\ of the user who installed the service.
       Patch from Matt Edman.
     - Include TLS overhead when counting bandwidth usage; previously, we
-      would count only the bytes sent over TLS, but not the bytes used to
-      send them.
+      would count only the bytes sent over TLS, but not the bytes used
+      to send them.
 
   o Minor features:
     - Start using the state file to store bandwidth accounting data:
@@ -27,6 +27,8 @@ Changes in version 0.1.2.5-alpha - 2007-01-03
     - Try to batch changes to the state file so that we do as few
       disk writes as possible while still storing important things in
       a timely fashion.
+    - The state file and the bw_accounting file get saved less often when
+      AvoidDiskWrites is set.
     - Ongoing work on eventdns infrastructure: add dns server and ipv6
       support.
     - Make PIDFile work on Windows (untested).
@@ -43,39 +45,40 @@ Changes in version 0.1.2.5-alpha - 2007-01-03
       addresses: .exit, .onion, and .noconnnect.
     - Add a maintainer script to tell us which options are missing
       documentation: "make check-docs".
-    - Remove some options that have been deprecated since at least 0.1.0.x:
-      AccountingMaxKB, LogFile, DebugLogFile, LogLevel, and SysLog.  Use
-      AccountingMax instead of AccountingMaxKB; use Log to set log options.
-    - DirServer configuration lines now have an orport option so clients can
-      open encrypted tunnels to the authorities without having downloaded
-      their descriptors yet.
-    - Clients track responses with status 503 from dirservers.  After a
-      dirserver has given us a 503, we try not to use it until an hour
-      has gone by, or until we have no dirservers that haven't given us
-      a 503.
-    - The state file and the bw_accounting file get saved less often when
-      AvoidDiskWrites is set.
+    - Remove some options that have been deprecated since at least
+      0.1.0.x: AccountingMaxKB, LogFile, DebugLogFile, LogLevel, and
+      SysLog. Use AccountingMax instead of AccountingMaxKB, and use Log
+      to set log options.
     - We no longer look for identity and onion keys in "identity.key" and
       "onion.key" -- these were replaced by secret_id_key and
       secret_onion_key in 0.0.8pre1.
-    - We no longer require unrecognized directory entries to be preceded by
-      "opt".
+    - We no longer require unrecognized directory entries to be
+      preceded by "opt".
+    - DirServer configuration lines now have an orport option so
+      clients can open encrypted tunnels to the authorities without
+      having downloaded their descriptors yet. Enabled for moria1,
+      moria2, tor26, and lefkada now in the default configuration.
+    - Clients track responses with status 503 from dirservers.  After a
+      dirserver has given us a 503, we try not to use it until an hour has
+      gone by, or until we have no dirservers that haven't given us a 503.
     - When we get a 503 from a directory, and we're not a server, we don't
-      count the failure against the total number of failures allowed for the
-      thing we're trying to download.
-    - Report X-Your-Address-Is correctly from tunneled directory connections;
-      don't report X-Your-Address-Is is when it's an internal address; and
-      never believe reported remote addresses when they're internal.
+      count the failure against the total number of failures allowed
+      for the thing we're trying to download.
+    - Report X-Your-Address-Is correctly from tunneled directory
+      connections; don't report X-Your-Address-Is is when it's an internal
+      address; and never believe reported remote addresses when they're
+      internal.
     - Add client-side caching for reverse DNS lookups.
     - Add support to tor-resolve for reverse lookups and SOCKS5.
     - We now check for the case when common DNS requests are going to
-      wildcarded addresses, and change our exit policy to reject *:* if
-      it's happening.  (Bug #364)
+      wildcarded addresses, and change our exit policy to reject *:*
+      if it's happening.  (Bug #364)
     - When we change nameservers or IP addresses, reset and re-launch
       our tests for DNS hijacking.
     - Block an obscure DoS attack from directory caches.
     - Add a BadDirectory flag to network status docs so that authorities
-      can (eventually) tell clients about caches they believe to be broken.
+      can (eventually) tell clients about caches they believe to be
+      broken.
 
   o Security bugfixes:
     - Stop sending the HttpProxyAuthenticator string to directory
@@ -124,12 +127,12 @@ Changes in version 0.1.2.5-alpha - 2007-01-03
       changed.
     - Cleaned-up code and documentation in NT services. Patch from Matt
       Edman.
-    - Removed the supposedly misleading error message mentioned in Bug #294.
-      Patch from Matt Edman.
+    - Removed the supposedly misleading error message mentioned in
+      Bug #294. Patch from Matt Edman.
     - Stop warning when a single nameserver fails: only warn when _all_ of
       our nameservers have failed.  (Bug #326.)
-    - When we only have one nameserver, raise the threshold for deciding that
-      the nameserver is dead. (Also bug #326)
+    - When we only have one nameserver, raise the threshold for deciding
+      that the nameserver is dead. (Also bug #326)
     - Directory authorities now only decide that routers are reachable
       if their identity keys are as expected.
     - When the user uses bad syntax in the Log config line, stop

src/or/config.c

@@ -719,13 +719,13 @@ add_default_trusted_dirservers(void)
   int i;
   const char *dirservers[] = {
     /* eventually we should mark moria1 as "v1only" */
-    "moria1 v1 18.244.0.188:9031 "
+    "moria1 v1 orport=9001 18.244.0.188:9031 "
       "FFCB 46DB 1339 DA84 674C 70D7 CB58 6434 C437 0441",
-    "moria2 v1 18.244.0.114:80 "
+    "moria2 v1 orport=443 18.244.0.114:80 "
       "719B E45D E224 B607 C537 07D0 E214 3E2D 423E 74CF",
-    "tor26 v1 86.59.21.38:80 "
+    "tor26 v1 orport=443 86.59.21.38:80 "
       "847B 1F85 0344 D787 6491 A548 92F9 0493 4E4E B85D",
-    "lefkada 140.247.60.64:80 "
+    "lefkada orport=443 140.247.60.64:80 "
       "38D4 F5FC F7B1 0232 28B8 95EA 56ED E7D5 CCDC AF32",
     "dizum 194.109.206.212:80 "
       "7EA6 EAD6 FD83 083C 538F 4403 8BBF A077 587D D755",

src/or/control.c

@@ -1752,6 +1752,8 @@ static const getinfo_item_t getinfo_items[] = {
   PREFIX("desc/name/", dir, "Router descriptors by nickname."),
   ITEM("desc/all-recent", dir,
        "All non-expired, non-superseded router descriptors."),
+  ITEM("ns/all", networkstatus,
+       "Brief summary of router status (v2 directory format)"),
   PREFIX("ns/id/", networkstatus,
          "Brief summary of router status by ID (v2 directory format)."),
   PREFIX("ns/name/", networkstatus,

src/or/hibernate.c

@@ -544,7 +544,7 @@ accounting_record_bandwidth_usage(time_t now, or_state_t *state)
   time_t tmp;
   int r = 0;
   uint64_t expected;
-  static time_t last_recorded;
+  static time_t last_recorded = 0;
 
   /* First, update bw_accounting. Until 0.1.2.5-alpha, this was the only place
    * we stored this information. The format is:

src/or/router.c

@@ -340,7 +340,7 @@ init_keys(void)
   cp = NULL;
   if (file_status(keydir) == FN_FILE)
     cp = read_file_to_str(keydir, 0, NULL);
-  if (!cp && strcmp(cp, fingerprint_line)) {
+  if (!cp || strcmp(cp, fingerprint_line)) {
     if (write_str_to_file(keydir, fingerprint_line, 0)) {
       log_err(LD_FS, "Error writing fingerprint line to file");
       return -1;