Filename: 114-distributed-storage.txt Title: Distributed Storage for Tor Hidden Service Descriptors Version: $Revision$ Last-Modified: $Date$ Author: Karsten Loesing Created: 13-May-2007 Status: Open Change history: 13-May-2007 Initial proposal 14-May-2007 Added changes suggested by Lasse Øverlier 30-May-2007 Changed descriptor format, key length discussion, typos 09-Jul-2007 Incorporated suggestions by Roger, added status of specification and implementation for upcoming GSoC mid-term evaluation 11-Aug-2007 Updated implementation statuses, included non-consecutive replication to descriptor format 20-Aug-2007 Renamed config option HSDir as HidServDirectoryV2 Overview: The basic idea of this proposal is to distribute the tasks of storing and serving hidden service descriptors from currently three authoritative directory nodes among a large subset of all onion routers. The three reasons to do this are better robustness (availability), better scalability, and improved security properties. Further, this proposal suggests changes to the hidden service descriptor format to prevent new security threats coming from decentralization and to gain even better security properties. Motivation: The current design of hidden services exhibits the following performance and security problems: First, the three hidden service authoritative directories constitute a performance bottleneck in the system. The directory nodes are responsible for storing and serving all hidden service descriptors. At the moment there are about 1000 descriptors at a time, but this number is assumed to increase in the future. Further, there is no replication protocol for descriptors between the three directory nodes, so that hidden services must ensure the availability of their descriptors by manually publishing them on all directory nodes. Whenever a fourth or fifth hidden service authoritative directory is added, hidden services will need to maintain an equally increasing number of replicas. These scalability issues have an impact on the current usage of hidden services and put an even higher burden on the development of new kinds of applications for hidden services that might require storing even more descriptors. Second, besides posing a limitation to scalability, storing all hidden service descriptors on three directory nodes also constitutes a security risk. The directory node operators could easily analyze the publish and fetch requests to derive information on service activity and usage and read the descriptor contents to determine which onion routers work as introduction points for a given hidden service and need to be attacked or threatened to shut it down. Furthermore, the contents of a hidden service descriptor offer only minimal security properties to the hidden service. Whoever gets aware of the service ID can easily find out whether the service is active at the moment and which introduction points it has. This applies to (former) clients, (former) introduction points, and of course to the directory nodes. It requires only to request the descriptor for the given service ID, which can be performed by anyone anonymously. This proposal suggests two major changes to approach the described performance and security problems: The first change affects the storage location for hidden service descriptors. Descriptors are distributed among a large subset of all onion routers instead of three fixed directory nodes. Each storing node is responsible for a subset of descriptors for a limited time only. It is not able to choose which descriptors it stores at a certain time, because this is determined by its onion ID which is hard to change frequently and in time (only routers which are stable for a given time are accepted as storing nodes). In order to resist single node failures and untrustworthy nodes, descriptors are replicated among a certain number of storing nodes. A first replication protocol makes sure that descriptors don't get lost when the node population changes; therefore, a storing node periodically requests the descriptors from its siblings. A second replication protocol distributes descriptors among non-consecutive nodes of the ID ring to prevent a group of adversaries from generating new onion keys until they have consecutive IDs to create a 'black hole' in the ring and make random services unavailable. Connections to storing nodes are established by extending existing circuits by one hop to the storing node. This also ensures that contents are encrypted. The effect of this first change is that the probability that a single node operator learns about a certain hidden service is very small and that it is very hard to track a service over time, even when it collaborates with other node operators. The second change concerns the content of hidden service descriptors. Obviously, security problems cannot be solved only by decentralizing storage; in fact, they could also get worse if done without caution. At first, a descriptor ID needs to change periodically in order to be stored on changing nodes over time. Next, the descriptor ID needs to be computable only for the service's clients, but should be unpredictable for all other nodes. Further, the storing node needs to be able to verify that the hidden service is the true originator of the descriptor with the given ID even though it is not a client. Finally, a storing node should learn as little information as necessary by storing a descriptor, because it might not be as trustworthy as a directory node; for example it does not need to know the list of introduction points. Therefore, a second key is applied that is only known to the hidden service provider and its clients and that is not included in the descriptor. It is used to calculate descriptor IDs and to encrypt the introduction points. This second key can either be given to all clients together with the hidden service ID, or to a group or a single client as an authentication token. In the future this second key could be the result of some key agreement protocol between the hidden service and one or more clients. A new text-based format is proposed for descriptors instead of an extension of the existing binary format for reasons of future extensibility. Design: The proposed design is described by the required changes to the current design. These requirements are grouped by content, rather than by affected specification documents or code files, and numbered for reference below. Hidden service clients, servers, and directories: /1/ Create routing list All participants can filter the consensus status document received from the directory authorities to one routing list containing only those servers that store and serve hidden service descriptors and which are running for at least 24 hours. A participant only trusts its own routing list and never learns about routing information from other parties. - rend-spec.txt, section 1.4: Added description of how to obtain a routing list of hidden service directories. - routerparse.c: Changed routerstatus_parse_entry_from_string to parse the "HSDir" flag in vote and consensus status documents. - routerlist.c: Changed router_get_routerlist() to initialize routing list. - or.h: Added hs_dirs member to routerlist_t. - Changed routerlist_free() to free storage held by routing list. - Added UPDATE_HS_DIRS_INTERVAL. - Added update_hs_dir_routing_table(). - Changed run_scheduled_events(). - Added is_hs_dir member to routerstatus_t. [Aug 11: Specified and running.] /2/ Determine responsible hidden service directory All participants can determine the hidden service directory that is responsible for storing and serving a given ID, as well as the hidden service directories that replicate its content. Every hidden service directory is responsible for the descriptor IDs in the interval from its predecessor, exclusive, to its own ID, inclusive. Further, a hidden service directory holds replicas for its n predecessors, where n denotes the number of consecutive replicas. (requires /1/) - rend-spec.txt, section 1.4: Added description of how to determine the responsible node(s) for a given descriptor ID. - routerlist.c: Added get_responsible_hs_dirs() to determine the routers that are responsible for a given descriptor ID. - Added is_hs_dir member to routerstatus_t. - Added have_enough_hs_dirs(). - Added next_hs_dir(). [July 9: Specified and running.] Hidden service clients and providers: /3/ Send tunneled HTTP request to hidden service directory in BEGIN_DIR cell - rend-spec.txt, section 1.4: Added the requirement that requests need to be sent via Tor. - rend-spec.txt, section 1.6: Added the requirement that requests need to be sent via Tor. [July 9: Pending] Hidden service directory nodes: /4/ Process tunneled HTTP request in BEGIN_DIR cell - rend-spec.txt, section 3.2: Added the requirement that requests need to be contained within BEGIN_DIR cells. - rend-spec.txt, section 3.3: Added the requirement that requests need to be contained within BEGIN_DIR cells. [July 9: Pending] /5/ Advertise hidden service directory functionality Every onion router that has its directory port open can decide whether it wants to store and serve hidden service descriptors by setting a new config option "HidServDirectoryV2" 0|1 to 1. An onion router with this config option being set includes the flag "hidden-service-dir" in its router descriptors that it sends to directory authorities. - tor.1.in: Added the config option HidServDirectoryV2. - dir-spec.txt, section 2.1: Added the flag hidden-service-dir to the router descriptor format. - rend-spec.txt, section 3.1: Added process of configuring a hidden service directory. - router.c: Changed router_dump_router_to_string() to include the hidden-service-dir flag in a router descriptor if configured. - or.h: Added HidServDirectoryV2 to or_options_t. - config.c: Added config option HidServDirectoryV2. [July 9: Specified and running.] /6/ Accept v2 publish requests, parse and store v2 descriptors Hidden service directory nodes accept publish requests for hidden service descriptors and store them to their local memory. (It is not necessary to make descriptors persistent, because after disconnecting, the onion router would not be accepted as storing node anyway, because it has not been running for at least 24 hours.) All requests and replies are formatted as HTTP messages. Requests are directed to the router's directory port and are contained within BEGIN_DIR cells. A hidden service directory node stores a descriptor only when it thinks that it is responsible for storing that descriptor based on its own routing table. Every hidden service directory node is responsible for the descriptor IDs in the interval of its n-th predecessor in the ID circle up to its own ID (n denotes the number of consecutive replicas). (requires /1/ and /4/) - rend-spec.txt, section 1.2: Added the new v2 hidden service descriptor format. - rend-spec.txt, section 3.2: Added the acceptance of v2 publish requests. - routerparse.c: Added rend_parse_v2_service_descriptor() to parse a v2 hidden service descriptor. - routerparse.c: Added desc_token_table[] to parse v2 hidden service descriptors. - routerparse.c: Added 8 keywords to directory_keyword to parse v2 hidden service descriptors. - rendcommon.c: Added rend_cache_store_v2_dir() to allow a hidden service directory to parse a v2 descriptor and store it in the local cache under its descriptor ID instead of its service ID. - or.h: Added constant REND_DESC_ID_V2_LEN to reflect that v2 descriptor IDs are longer than v0/1 onion addresses. - Changed directory_handle_command_post(). [Aug 11: Specified and running.] /7/ Accept v2 fetch requests Same as /6/, but with fetch requests for hidden service descriptors. (requires /2/ and /4/) - rend-spec.txt, section 3.3: Added the processing of v2 fetch requests. - rendcommon.c: Added rend_cache_lookup_v2_dir() to allow a hidden service directory to look up a v2 descriptor in the local cache under its descriptor ID instead of its service ID. - or.h: Added constant REND_DESC_ID_V2_LEN to reflect that v2 descriptor IDs are longer than v0/1 onion addresses. - Changed directory_handle_command_get(). [Aug 11: Specified and running.] /8/ Replicate descriptors with neighbors A hidden service directory node replicates descriptors from its two predecessors by downloading them once an hour. Further, it checks its routing table periodically for changes. Whenever it realizes that a predecessor has left the network, it establishes a connection to the new n-th predecessor and requests its stored descriptors in the interval of its (n+1)-th predecessor and the requested n-th predecessor. Whenever it realizes that a new onion router has joined with an ID higher than its former n-th predecessor, it adds it to its predecessors and discards all descriptors in the interval of its (n+1)-th and its n-th predecessor. (requires /1/) - rend-spec.txt, section 3.3: Added the replication of v2 descriptors. - Added HS_DIR_REPLICATION_INTERVAL. - Added next_hs_dir and previous_hs_dir. - Changed directory_handle_command_get(). - Changed run_scheduled_events. - Added hs_dir_perform_replication(). - Added rend_cache_lookup_v2_replicas. - Added DIR_PURPOSE_REPLICATE_RENDDESC_V2. - Changed directory_initiate_command. - directory_send_command. - Changed connection_dir_client_reached_eof. [Aug 11: To some extend specified, running.] Authoritative directory nodes: /9/ Confirm a router's hidden service directory functionality Directory nodes include a new flag "HSDir" for routers that decided to provide storage for hidden service descriptors and that are running for at least 24 hours. The last requirement prevents a node from frequently changing its onion key to become responsible for an identifier it wants to target. - dir-spec.txt, section 3.2: Added the status flag "HSDir" to the vote and consensus status document format. - dir-spec.txt, section 3.3: Added a rule for how an authority decides whether a router is assigned the flag "HSDir". - rend-spec.txt, section 3.1: Added the decision on whether an onion router is confirmed to act as hidden service directory or not. - routerparse.c: Changed router_parse_entry_from_string() to parse the "hidden-service-dir" flag in router descriptors. - routerparse.c: Added an entry to routerdesc_token_table[] to parse the "hidden-service-directory" flag in router descriptors. - routerparse.c: Added 1 keyword to directory_keyword to parse the "hidden-service-dir" flag in router descriptors. - or.h: Added is_hs_dir and wants_to_be_hs_dir members to routerinfo_t. - dirserv.c: Changed routerstatus_format_entry() to include the "HSDir" flag in vote and consensus status documents. - dirserv.c: Changed set_routerstatus_from_routerinfo() to set the "HSDir" flag. - Added dirserv_thinks_router_is_hs_dir(). - Added MIN_UPTIME_HS_DIR and HS_DIR_REACHABLE_TIMEOUT. [Aug 11: Specified and running.] Hidden service provider: /10/ Configure v2 hidden service Each hidden service provider that has set the config option "PublishV2HidServDescriptors" 0|1 to 1 is configured to publish v2 descriptors and conform to the v2 connection establishment protocol. When configuring a hidden service, a hidden service provider checks if it has already created a random secret_cookie and a hostname2 file; if not, it creates both of them. (requires /2/) - tor.1.in: Added the config option PublishV2HidServDescriptors. - tor.1.in: Added the files hostname2 and secret_cookie. - rend-spec.txt, section 1.1: Added requirement to create secret_cookie and hostname2 file. - rendservice.c: Added rend_get_hostname2() to assemble a v2 onion address. - rendservice.c: Changed rend_service_load_keys() to write a secret_cookie and a hostname2 file. - rendservice.c: Extended rend_service_t by a member secret_cookie. - or.h: Added PublishV2HidServDescriptors to or_options_t. - config.c: Added config option PublishV2HidServDescriptors. [July 9: Specified and running.] /11/ Establish introduction points with fresh key If configured to publish only v2 descriptors and no v0/v1 descriptors any more, a hidden service provider that is setting up the hidden service at introduction points does not pass its own public key, but the public key of a freshly generated key pair. It also includes these fresh public keys in the hidden service descriptor together with the other introduction point information. The reason is that the introduction point does not need to and therefore should not know for which hidden service it works, so as to prevent it from tracking the hidden service's activity. (If a hidden service provider supports both, v0/v1 and v2 descriptors, v0/v1 clients rely on the fact that all introduction points accept the same public key, so that this new feature cannot be used.) - rend-spec.txt, section 1.3: Instead of Bob's public key, the hidden service provider uses a freshly generated public key for every introduction point. - TODO: Change in rend_encode_v2_descriptors. [July 9: Specified, but not yet implemented.] /12/ Encode v2 descriptors and send v2 publish requests If configured to publish v2 descriptors, a hidden service provider publishes a new descriptor whenever its content changes or a new publication period starts for this descriptor. If the current publication period would only last for less than 60 minutes (= 2 x 30 minutes to allow the server to be 30 minutes behind and the client 30 minutes ahead), the hidden service provider publishes both a current descriptor and one for the next period. Publication is performed by sending the descriptor to all hidden service directories that are responsible for keeping replicas for the descriptor ID. This includes two non-consecutive replicas that are stored at 3 consecutive nodes each. (requires /1/, /2/, and /3/) - rend-spec.txt, section 1.2: Added the new v2 hidden service descriptor format. - rend-spec.txt, section 1.4: Bob's OP does not only upload v0/v1 service descriptors to the authoritative directories, but also v2 service descriptors to the hidden service directories. - rendservice.c: Changed upload_service_descriptor() to upload v2 hidden service descriptors, if configured. - rendservice.c: Changed rend_consider_services_upload() to also initiate the upload of v2 descriptors, if configured. - rendservice.c: Extended rend_service_t by a member secret_cookie. - rendcommon.c: Added rend_encode_v2_descriptor() to encode a v2 descriptor. - or.h: Added constant DIR_PURPOSE_UPLOAD_RENDDESC_V2. - directory.c: Added directory_post_to_hs_dir(). - directory.c: Changed directory_initiate_command() to also recognize v2 publish requests. - directory.c: Changed directory_send_command() to also prepare v2 publish requests. - crypto.c: Added implementation for crypto_cipher_encrypt_cbc(). - Changed connection_dir_client_reached_eof(). [Aug 11: Specified and running.] Hidden service client: /13/ Send v2 fetch requests A hidden service client that has set the config option "FetchV2HidServDescriptors" 0|1 to 1 handles SOCKS requests for v2 onion addresses by requesting a v2 descriptor from a randomly chosen hidden service directory that is responsible for keeping replica for the descriptor ID. In total there are six replicas of which the first and the last three are stored on consecutive nodes. The probability of picking one of the three consecutive replicas is 1/6, 2/6, and 3/6 to incorporate the fact that the availability will be the highest on the node with next higher ID. A hidden service client relies on the hidden service provider to store two sets of descriptors to compensate clock skew between service and client. (requires /1/, /2/, and /3/) - tor.1.in: Added the config option FetchV2HidServDescriptors. - rend-spec.txt, section 1.5: Added the new v2 onion address format. - rend-spec.txt, section 1.6: Alice's OP downloads the service descriptors similarly as Bob's OP uploaded them in 1.4. - rendcommon.c: Changed rend_cache_lookup_entry to enable it to also lookup v2 descriptors. - rendcommon.c: Added rend_compute_v2_desc_id() to generate v2 descriptor IDs from v2 onion addresses. - rendcommon.c: Changed rend_valid_service_id() to also consider v2 onion addresses as valid and return the version number of the request (0 or 2). - rendclient.c: Added rend_client_refetch_v2_renddesc() to fetch v2 service descriptors using the secret cookie. - rendclient.c: Changed rend_client_remove_intro_point() to copy the secret cookie if the local descriptor has expired or there are no introduction points left. - or.h: Added FetchV2HidServDescriptors to or_options_t. - or.h: Added constant REND_DESC_ID_V2_LEN to reflect that v2 descriptor IDs are longer than v0/1 onion addresses. - or.h: Added constant DIR_PURPOSE_FETCH_RENDDESC_V2. - directory.c: Added directory_get_from_hs_dir(). - directory.c: Changed directory_initiate_command() to also recognize v2 fetch requests. - directory.c: Changed directory_send_command() to also prepare v2 fetch requests. - connection_edge.c: Changed connection_ap_handshake_rewrite_and_attach() to fetch v2 service descriptors. - connection_edge.c: Changed parse_extended_hostname() to accept both, current and v2 onion addresses. - config.c: Added config options FetchV2HidServDescriptors. [Aug 11: Base version specified and running, but no memory of failed hidden service directories, yet.] /14/ Process v2 fetch reply and parse v2 descriptors A hidden service client that has sent a request for a v2 descriptor can parse it and store it to the local cache of rendezvous service descriptors. - rend-spec.txt, section 1.2: Added the new v2 hidden service descriptor format. - rend-spec.txt, section 1.6: Alice's OP parses the reply received from the hidden service directory. - routerparse.c: Added rend_parse_v2_service_descriptor() to parse a v2 hidden service descriptor. - routerparse.c: Added rend_decrypt_introduction_points() to decrypt and parse the list of introduction points. - routerparse.c: Added ipo_token_table[] to parse the decrypted introduction points of v2 hidden service descriptors. - routerparse.c: Added desc_token_table[] to parse v2 hidden service descriptors. - routerparse.c: Added 8 keywords to directory_keyword to parse v2 hidden service descriptors, and 5 to parse the decrypted list of introduction points. - rendcommon.c: Added rend_cache_store_v2_client() to parse a v2 descriptor and parse the encrypted list of introduction points. - or.h: Added rend_version and secret_cookie to edge_connection_t, to dir_connection_t, and to origin_circuit_t to be able to decrypt introduction points when receiving a v2 descriptor. - directory.c: Changed connection_dir_client_reached_eof() to also parse v2 fetch replies. - crypto.c: Added implementation for crypto_cipher_decrypt_cbc(). [July 9: Specified and running.] /15/ Establish connection to v2 hidden service A hidden service client can establish a connection to a hidden service using a v2 descriptor. This includes using the secret cookie for decrypting the introduction points contained in the descriptor. When contacting an introduction point, the client does not use the public key of the hidden service provider, but the freshly-generated public key that is included in the hidden service descriptor. Whether or not a fresh key is used instead of the key of the hidden service depends on the available protocol versions that are included in the descriptor; by this, connection establishment is to a certain extend decoupled from fetching the descriptor. - rend-spec.txt, section 1.8: Alice uses the public key that is included in the descriptor instead of Bob's permanent service key. - rendclient.c: Changed rend_client_introduction_acked() to copy the secret cookie in case the introduction point denied the request. - rendclient.c: Changed rend_client_remove_intro_point() to copy the secret cookie if the local descriptor has expired or there are no introduction points left. - or.h: Added secret_cookie to edge_connection_t, to dir_connection_t, and to origin_circuit_t to be able to decrypt introduction points when receiving a v2 descriptor. - circuitlist.c: Changed _circuit_mark_for_close() to pass the secret cookie to rend_client_remove_intro_point() when an intro circ has failed. - circuituse.c: Changed circuit_get_open_circ_or_launch() to fetch a v2 descriptor with the secret cookie, if no descriptor is available, or copy the secret cookie to the circuit, in case it dies later, so that it can be used to fetch a new descriptor. [July 9: Base version specified and running, but without fresh key.] Hidden service descriptor: (Requirements concerning the descriptor format are contained in /6/ and /7/.) The new v2 hidden service descriptor format looks like this: onion-address = h(public-key) + cookie descriptor-id = h(h(public-key) + h(time-period + cookie + relica)) descriptor-content = { descriptor-id, version, public-key, h(time-period + cookie + replica), timestamp, protocol-versions, { introduction-points } encrypted with cookie } signed with private-key The "descriptor-id" needs to change periodically in order for the descriptor to be stored on changing nodes over time. It may only be computable by a hidden service provider and all of his clients to prevent unauthorized nodes from tracking the service activity by periodically checking whether there is a descriptor for this service. Finally, the hidden service directory needs to be able to verify that the hidden service provider is the true originator of the descriptor with the given ID. Therefore, "descriptor-id" is derived from the "public-key" of the hidden service provider, the current "time-period" which changes every 24 hours, a secret "cookie" shared between hidden service provider and clients, and a "replica" denoting the number of this non-consecutive replica. (The "time-period" is constructed in a way that time periods do not change at the same moment for all descriptors by deriving a value between 0:00 and 23:59 hours from h(public-key) and making the descriptors of this hidden service provider expire at that time of the day.) The "descriptor-id" is defined to be 160 bits long. [extending the "descriptor-id" length suggested by LØ] Only the hidden service provider and the clients are able to generate future "descriptor-ID"s. Hence, the "onion-address" is extended from now the hash value of "public-key" by the secret "cookie". The "public-key" is determined to be 80 bits long, whereas the "cookie" is dimensioned to be 120 bits long. This makes a total of 200 bits or 40 base32 chars, which is quite a lot to handle for a human, but necessary to provide sufficient protection against an adversary from generating a key pair with same "public-key" hash or guessing the "cookie". A hidden service directory can verify that a descriptor was created by the hidden service provider by checking if the "descriptor-id" corresponds to the "public-key" and if the signature can be verified with the "public-key". The "introduction-points" that are included in the descriptor are encrypted using the same "cookie" that is shared between hidden service provider and clients. [correction to use another key than h(time-period + cookie) as encryption key for introduction points made by LØ] A new text-based format is proposed for descriptors instead of an extension of the existing binary format for reasons of future extensibility. Security implications: The security implications of the proposed changes are grouped by the roles of nodes that could perform attacks or on which attacks could be performed. Attacks by authoritative directory nodes Authoritative directory nodes are no longer the single places in the network that know about a hidden service's activity and introduction points. Thus, they cannot perform attacks using this information, e.g. track a hidden service's activity or usage pattern or attack its introduction points. Formerly, it would only require a single corrupted authoritative directory operator to perform such an attack. Attacks by hidden service directory nodes A hidden service directory node could misuse a stored descriptor to track a hidden service's activity and usage pattern by clients. Though there is no countermeasure against this kind of attack, it is very expensive to track a certain hidden service over time. An attacker would need to run a large number of stable onion routers that work as hidden service directory nodes to have a good probability to become responsible for its changing descriptor IDs. For each period, the probability is: 1-(N-c choose r)/(N choose r) for N-c>=r and 1 otherwise, with N as total number of hidden service directories, c as compromised nodes, and r as number of replicas The hidden service directory nodes could try to make a certain hidden service unavailable to its clients. Therefore, they could discard all stored descriptors for that hidden service and reply to clients that there is no descriptor for the given ID or return an old or false descriptor content. The client would detect a false descriptor, because it could not contain a correct signature. But an old content or an empty reply could confuse the client. Therefore, the countermeasure is to replicate descriptors among a small number of hidden service directories, e.g. 5. The probability of a group of collaborating nodes to make a hidden service completely unavailable is in each period: (c choose r)/(N choose r) for c>=r and N>=r, and 0 otherwise, with N as total number of hidden service directories, c as compromised nodes, and r as number of replicas A hidden service directory could try to find out which introduction points are working on behalf of a hidden service. In contrast to the previous design, this is not possible anymore, because this information is encrypted to the clients of a hidden service. Attacks on hidden service directory nodes An anonymous attacker could try to swamp a hidden service directory with false descriptors for a given descriptor ID. This is prevented by requiring that descriptors are signed. Anonymous attackers could swamp a hidden service directory with correct descriptors for non-existing hidden services. There is no countermeasure against this attack. However, the creation of valid descriptors is more expensive than verification and storage in local memory. This should make this kind of attack unattractive. Attacks by introduction points Current or former introduction points could try to gain information on the hidden service they serve. But due to the fresh key pair that is used by the hidden service, this attack is not possible anymore. Attacks by clients Current or former clients could track a hidden service's activity, attack its introduction points, or determine the responsible hidden service directory nodes and attack them. There is nothing that could prevent them from doing so, because honest clients need the full descriptor content to establish a connection to the hidden service. At the moment, the only countermeasure against dishonest clients is to change the secret cookie and pass it only to the honest clients. Compatibility: The proposed design is meant to replace the current design for hidden service descriptors and their storage in the long run. There should be a first transition phase in which both, the current design and the proposed design are served in parallel. Onion routers should start serving as hidden service directories, and hidden service providers and clients should make use of the new design if both sides support it. Hidden service providers should be allowed to publish descriptors of the current format in parallel, and authoritative directories should continue storing and serving these descriptors. After the first transition phase, hidden service providers should stop publishing descriptors on authoritative directories, and hidden service clients should not try to fetch descriptors from the authoritative directories. However, the authoritative directories should continue serving hidden service descriptors for a second transition phase. As of this point, all v2 config options should be set to a default value of 1. After the second transition phase, the authoritative directories should stop serving hidden service descriptors. Specification: The proposed changes affect multiple sections in several specification documents that are only mentioned in the following. (As for now, all changes to specification documents are limited to the SVN branch 114-dist-storage.) tor.1.in Added the config options HidServDirectoryV2 (/5/), PublishV2HidServDescriptors (/10/), and FetchV2HidServDescriptors (/13/). Added the files hostname2 and secret_cookie (/10/). dir-spec.txt 2.1 Added the flag hidden-service-dir to the router descriptor format (/5/). 3.2 Added the status flag HSDir to the vote and consensus status document format (/9/). 3.3 Added a rule for how an authority decides whether a router is assigned the flag HSDir (/9/). rend-spec.txt 0.4 Added history 1.1 Added requirement to create secret_cookie and hostname2 file (/10/). 1.2 Added the new v2 hidden service descriptor format (/6/, /12/ and /14/). 1.3 Instead of Bob's public key, the hidden service provider uses a freshly generated public key for every introduction point (/11/). 1.4 Added description of how to obtain a routing list of hidden service directories (/1/). 1.4 Added description of how to determine the responsible node(s) for a given descriptor ID (/2/). 1.4 Bob's OP does not only upload v0/v1 service descriptors to the authoritative directories, but also v2 service descriptors to the hidden service directories (/12/). 1.4 Added the requirement that requests need to be sent via Tor (/3/). 1.5 Added the new v2 onion address format (/13/). 1.6 Added the requirement that requests need to be sent via Tor (/3/). 1.6 Alice's OP downloads the service descriptors similarly as Bob's OP uploaded them in 1.4 (/13/). 1.6 Alice's OP parses the reply received from the hidden service directory (/14/). 1.8 Alice uses the public key that is included in the descriptor instead of Bob's permanent service key (/15/). 3.1: Added process of configuring a hidden service directory (/5/). 3.1: Added the decision on whether an onion router is confirmed to act as hidden service directory or not (/9/). 3.2: Added the requirement that requests need to be contained within BEGIN_DIR cells (/4/). 3.2: Added the acceptance of v2 publish requests (/6/). 3.3: Added the requirement that requests need to be contained within BEGIN_DIR cells (/4/). 3.3: Added the processing of v2 fetch requests (/7/). 3.3: Added the replication of v2 descriptors (/8/). Implementation: The proposed changes affect the following changes in the source code. (As for now, all changes to code are limited to the SVN branch 114-dist-storage.) container.h Added prototype for smartlist_digest_next_circular() (/2/). container.c Added implementation for smartlist_digest_next_circular() (/2/). crypto.h Added 3 prototypes according to the changes in crypto.c (various requirements). crypto.c Added implementation for crypto_cipher_encrypt_cbc() (/12/). Added implementation for crypto_cipher_decrypt_cbc() (/14/). Added implementation for base32_decode() (various requirements). circuitlist.c Changed _circuit_mark_for_close() to pass the secret cookie to rend_client_remove_intro_point() when an intro circ has failed (/15/). circuituse.c Changed circuit_get_open_circ_or_launch() to fetch a v2 descriptor with the secret cookie, if no descriptor is available, or copy the secret cookie to the circuit, in case it dies later, so that it can be used to fetch a new descriptor (/15/). config.c Added config options FetchV2HidServDescriptors (/13/), HidServDirectoryV2 (/5/), and PublishV2HidServDescriptors (/10/). connection_edge.c Changed connection_ap_handshake_rewrite_and_attach() to fetch v2 service descriptors (/13/). Changed parse_extended_hostname() to accept both, current and v2 onion addresses (/13/). directory.c Added directory_post_to_hs_dir() (/12/). Added directory_get_from_hs_dir() (/13/). Changed directory_initiate_command() to also recognize v2 publish (/12/) and fetch (/13/) requests. Changed directory_send_command() to also prepare v2 publish (/12/) and fetch (/13/) requests. Changed connection_dir_client_reached_eof() to also parse v2 fetch replies (/14/). Changed directory_handle_command_get() to handle v2 fetch requests (/13/). Changed directory_handle_command_post() to handle v2 publish requests (/12/). dirserv.c Changed routerstatus_format_entry() to include the "HSDir" flag in vote and consensus status documents (/9/). Changed set_routerstatus_from_routerinfo() to set the "HSDir" flag (/9/). or.h Added constants DIR_PURPOSE_UPLOAD_RENDDESC_V2 (/12/) and DIR_PURPOSE_FETCH_RENDDESC_V2 (/13/). Added constant REND_DESC_ID_V2_LEN to reflect that v2 descriptor IDs are longer than v0/1 onion addresses (/6/, /7/, and /13/). Added rend_version and secret_cookie to edge_connection_t, to dir_connection_t, and to origin_circuit_t to be able to decrypt introduction points when receiving a v2 descriptor (/14/ and /15/). Added is_hs_dir member to routerinfo_t and to routerstatus_t (/9/). Added hs_dirs member to routerlist_t (/1/). Added FetchV2HidServDescriptors (/13/), HidServDirectoryV2 (/5/), and PublishV2HidServDescriptors (/10/) to or_options_t. Added 7 new members to rend_service_descriptor_t to store v2-specific information (/12/, /14/, and /15/). Added 11 prototypes and changed the signature of 1 according to the changes in .c files (various requirements). rendclient.c Changed rend_client_introduction_acked() to copy the secret cookie in case the introduction point denied the request (/15/). Added rend_client_refetch_v2_renddesc() to fetch v2 service descriptors using the secret cookie (/13/). Changed rend_client_remove_intro_point() to copy the secret cookie if the local descriptor has expired or there are no introduction points left (/13/ and /15/). rendcommon.c Added rend_compute_v2_descriptor_fields() to prepare the encoding of a v2 descriptor (/12/). Added rend_compute_desc_id() to generate v2 descriptor IDs from v2 onion addresses (/13/). Added rend_encode_v2_descriptor() to encode a v2 descriptor (/12/). Changed rend_valid_service_id() to also consider v2 onion addresses as valid and return the version number of the request (1 or 2) (/13/). Changed rend_cache_lookup_entry to enable it to also lookup v2 descriptors (/13/). Added rend_cache_lookup_v2_dir() to allow a hidden service directory to look up a v2 descriptor in the local cache under its descriptor ID instead of its service ID (/7/). Moved the parsing part from rend_cache_store() to the new function rend_cache_store_parse() to reuse it for v2 descriptors (/6/). Added rend_cache_store_v2_client() to parse a v2 descriptor and parse the encrypted list of introduction points (/14/). Added rend_cache_store_v2_dir() to allow a hidden service directory to store a v2 descriptor in the local cache under its descriptor ID instead of its service ID (/6/). rendservice.c Extended rend_service_t by a member secret_cookie (/10/ and /12/). Added rend_get_hostname2() to assemble a v2 onion address (/10/). Changed rend_service_load_keys() to write a secret_cookie and a hostname2 file (/10/). Changed upload_service_descriptor() to upload v2 hidden service descriptors, if configured (/12/). Changed rend_consider_services_upload() to also initiate the upload of v2 descriptors, if configured (/12/). router.c Changed router_dump_router_to_string() to include the "hidden-service-dir" flag in a router descriptor if configured (/5/). routerlist.c Changed router_get_routerlist() to initialize routing list (/1/). Added get_responsible_hs_dir() to determine the router that is responsible for a given descriptor ID (/2/). routerparse.c Added 14 keywords to directory_keyword; 1 to parse the "hidden-service-dir" flag in router descriptors (/9/), 8 to parse v2 hidden service descriptors (/6/ and /14/), and 5 to parse the decrypted list of introduction points (/14/). Added an entry to routerdesc_token_table[] to parse the "hidden-service-directory" flag in router descriptors (/9/). Added desc_token_table[] to parse v2 hidden service descriptors (/6/ and /14/). Added ipo_token_table[] to parse the decrypted introduction points of v2 hidden service descriptors (/14/). Changed router_parse_entry_from_string() to parse the "hidden-service-dir" flag in router descriptors (/9/). Changed routerstatus_parse_entry_from_string to parse the "HSDir" flag in vote and consensus status documents (/1/). Added rend_parse_v2_service_descriptor() to parse a v2 hidden service descriptor (/6/ and /14/). Added rend_decrypt_introduction_points() to decrypt and parse the list of introduction points (/14/). Test: The changes were tested via test functions in test.c for separate, short-running functionality and using an automatic validation based on PuppeTor.