Li, Xun 1115c195cd Linux 1.8 Open Source Gold release 7 vuotta sitten
..
doc 9441de4c38 Initial release of Intel SGX for Linux. 8 vuotta sitten
include 9441de4c38 Initial release of Intel SGX for Linux. 8 vuotta sitten
scripts 9441de4c38 Initial release of Intel SGX for Linux. 8 vuotta sitten
src 1115c195cd Linux 1.8 Open Source Gold release 7 vuotta sitten
AUTHORS 9441de4c38 Initial release of Intel SGX for Linux. 8 vuotta sitten
COPYING 9441de4c38 Initial release of Intel SGX for Linux. 8 vuotta sitten
ChangeLog 9441de4c38 Initial release of Intel SGX for Linux. 8 vuotta sitten
LICENSE 9441de4c38 Initial release of Intel SGX for Linux. 8 vuotta sitten
Makefile.am 9441de4c38 Initial release of Intel SGX for Linux. 8 vuotta sitten
NEWS 9441de4c38 Initial release of Intel SGX for Linux. 8 vuotta sitten
README 9441de4c38 Initial release of Intel SGX for Linux. 8 vuotta sitten
TODO 9441de4c38 Initial release of Intel SGX for Linux. 8 vuotta sitten
acinclude.m4 9441de4c38 Initial release of Intel SGX for Linux. 8 vuotta sitten
autogen-linux.sh 1115c195cd Linux 1.8 Open Source Gold release 7 vuotta sitten
configure.in 9441de4c38 Initial release of Intel SGX for Linux. 8 vuotta sitten

README

-*- mode: Outline -*-

This is version 1.0 of the unwind library. This library supports
several architecture/operating-system combinations:

Linux/x86-64: Works well.
Linux/x86: Works well.
Linux/ARM: Works well.
Linux/IA-64: Fully tested and supported.
Linux/PARISC: Works well, but C library missing unwind-info.
HP-UX/IA-64: Mostly works but known to have some serious limitations.
Linux/PPC64: Newly added.
FreeBSD/i386: Newly added.
FreeBSD/x86-64: Newly added (FreeBSD architecture is known as amd64).


* General Build Instructions

In general, this library can be built and installed with the following
commands:

$ autoreconf -i # Needed only for building from git. Depends on libtool.
$ ./configure
$ make
$ make install prefix=PREFIX

where PREFIX is the installation prefix. By default, a prefix of
/usr/local is used, such that libunwind.a is installed in
/usr/local/lib and unwind.h is installed in /usr/local/include. For
testing, you may want to use a prefix of /usr/local instead.


* Building with Intel compiler

** Version 8 and later

Starting with version 8, the preferred name for the IA-64 Intel
compiler is "icc" (same name as on x86). Thus, the configure-line
should look like this:

$ ./configure CC=icc CFLAGS="-g -O3 -ip" CXX=icc CCAS=gcc CCASFLAGS=-g \
LDFLAGS="-L$PWD/src/.libs"


* Building on HP-UX

For the time being, libunwind must be built with GCC on HP-UX.

libunwind should be configured and installed on HP-UX like this:

$ ./configure CFLAGS="-g -O2 -mlp64" CXXFLAGS="-g -O2 -mlp64"

Caveat: Unwinding of 32-bit (ILP32) binaries is not supported
at the moment.

** Workaround for older versions of GCC

GCC v3.0 and GCC v3.2 ship with a bad version of sys/types.h. The
workaround is to issue the following commands before running
"configure":

$ mkdir $top_dir/include/sys
$ cp /usr/include/sys/types.h $top_dir/include/sys

GCC v3.3.2 or later have been fixed and do not require this
workaround.

* Building for PowerPC64 / Linux

For building for power64 you should use:

$ ./configure CFLAGS="-g -O2 -m64" CXXFLAGS="-g -O2 -m64"

If your power support altivec registers:
$ ./configure CFLAGS="-g -O2 -m64 -maltivec" CXXFLAGS="-g -O2 -m64 -maltivec"

To check if your processor has support for vector registers (altivec):
cat /proc/cpuinfo | grep altivec
and should have something like this:
cpu : PPC970, altivec supported

If libunwind seems to not work (backtracing failing), try to compile
it with -O0, without optimizations. There are some compiler problems
depending on the version of your gcc.

* Building on FreeBSD

General building instructions apply. To build and execute several tests,
you need libexecinfo library available in ports as devel/libexecinfo.

Development of the port was done of FreeBSD 8.0-STABLE. The library
was build with the system compiler that is modified version of gcc 4.2.1,
as well as the gcc 4.4.3.

* Regression Testing

After building the library, you can run a set of regression tests with:

$ make check

** Expected results on IA-64 Linux

Unless you have a very recent C library and compiler installed, it is
currently expected to have the following tests fail on IA-64 Linux:

Gtest-init (should pass starting with glibc-2.3.x/gcc-3.4)
Ltest-init (should pass starting with glibc-2.3.x/gcc-3.4)
test-ptrace (should pass starting with glibc-2.3.x/gcc-3.4)
run-ia64-test-dyn1 (should pass starting with glibc-2.3.x)

This does not mean that libunwind cannot be used with older compilers
or C libraries, it just means that for certain corner cases, unwinding
will fail. Since they're corner cases, it is not likely for
applications to trigger them.

Note: If you get lots of errors in Gia64-test-nat and Lia64-test-nat, it's
almost certainly a sign of an old assembler. The GNU assembler used
to encode previous-stack-pointer-relative offsets incorrectly.
This bug was fixed on 21-Sep-2004 so any later assembler will be
fine.

** Expected results on x86 Linux

The following tests are expected to fail on x86 Linux:

Gtest-resume-sig (fails to get SIGUSR2)
Ltest-resume-sig (likewise)
Gtest-dyn1 (no dynamic unwind info support yet)
Ltest-dyn1 (no dynamic unwind info support yet)
test-setjmp (longjmp() not implemented yet)
run-check-namespace (no _Ux86_getcontext yet)
test-ptrace

** Expected results on x86-64 Linux

The following tests are expected to fail on x86-64 Linux:

Gtest-dyn1 (no dynamic unwind info support yet)
Ltest-dyn1 (no dynamic unwind info support yet)
Gtest-init (see http://gcc.gnu.org/bugzilla/show_bug.cgi?id=18743)
Ltest-init (likewise)
test-async-sig (crashes due to bad unwind-info?)
test-setjmp (longjmp() not implemented yet)
run-check-namespace (no _Ux86_64_getcontext yet)
run-ptrace-mapper (??? investigate)
run-ptrace-misc (see http://gcc.gnu.org/bugzilla/show_bug.cgi?id=18748
and http://gcc.gnu.org/bugzilla/show_bug.cgi?id=18749)

** Expected results on PARISC Linux

Caveat: GCC v3.4 or newer is needed on PA-RISC Linux. Earlier
versions of the compiler failed to generate the exception-handling
program header (GNU_EH_FRAME) needed for unwinding.

The following tests are expected to fail on x86-64 Linux:

Gtest-bt (backtrace truncated at kill() due to lack of unwind-info)
Ltest-bt (likewise)
Gtest-resume-sig (Gresume.c:my_rt_sigreturn() is wrong somehow)
Ltest-resume-sig (likewise)
Gtest-init (likewise)
Ltest-init (likewise)
Gtest-dyn1 (no dynamic unwind info support yet)
Ltest-dyn1 (no dynamic unwind info support yet)
test-setjmp (longjmp() not implemented yet)
run-check-namespace (toolchain doesn't support HIDDEN yet)

** Expected results on HP-UX

"make check" is currently unsupported for HP-UX. You can try to run
it, but most tests will fail (and some may fail to terminate). The
only test programs that are known to work at this time are:

tests/bt
tests/Gperf-simple
tests/test-proc-info
tests/test-static-link
tests/Gtest-init
tests/Ltest-init
tests/Gtest-resume-sig
tests/Ltest-resume-sig

** Expected results on PPC64 Linux

"make check" should run with no more than 10 out of 24 tests failed.


* Performance Testing

This distribution includes a few simple performance tests which give
some idea of the basic cost of various libunwind operations. After
building the library, you can run these tests with the following
commands:

$ cd tests
$ make perf

* Contacting the Developers

Please direct all questions regarding this library to:

libunwind-devel@nongnu.org

You can do this by sending a mail to libunwind-request@nongnu.org with
a body of:

subscribe libunwind-devel

or you can subscribe and manage your subscription via the
web-interface at:

https://savannah.nongnu.org/mail/?group=libunwind