Merge branch 'maint-0.2.1'

ChangeLog

@@ -105,6 +105,9 @@ Changes in version 0.2.1.20 - 2009-??-??
     - Fix a signed/unsigned compile warning in 0.2.1.19.
     - Fix possible segmentation fault on directory authorities. Bugfix on
       0.2.1.14-rc.
+    - Fix an extremely infinite recursion bug that could occur if we tried
+      to log a message after shutting down the log subsystem.  Found by Matt
+      Edman.  Bugfix on 0.2.0.16-alpha.
 
 
 Changes in version 0.2.1.19 - 2009-07-28
@@ -201,6 +204,37 @@ Changes in version 0.2.1.17-rc - 2009-07-07
       further bugs for relays on dynamic IP addresses.
 
 
+Changes in version 0.2.0.35 - 2009-06-24
+  o Security fix:
+    - Avoid crashing in the presence of certain malformed descriptors.
+      Found by lark, and by automated fuzzing.
+    - Fix an edge case where a malicious exit relay could convince a
+      controller that the client's DNS question resolves to an internal IP
+      address. Bug found and fixed by "optimist"; bugfix on 0.1.2.8-beta.
+
+  o Major bugfixes:
+    - Finally fix the bug where dynamic-IP relays disappear when their
+      IP address changes: directory mirrors were mistakenly telling
+      them their old address if they asked via begin_dir, so they
+      never got an accurate answer about their new address, so they
+      just vanished after a day. For belt-and-suspenders, relays that
+      don't set Address in their config now avoid using begin_dir for
+      all direct connections. Should fix bugs 827, 883, and 900.
+    - Fix a timing-dependent, allocator-dependent, DNS-related crash bug
+      that would occur on some exit nodes when DNS failures and timeouts
+      occurred in certain patterns. Fix for bug 957.
+
+  o Minor bugfixes:
+    - When starting with a cache over a few days old, do not leak
+      memory for the obsolete router descriptors in it. Bugfix on
+      0.2.0.33; fixes bug 672.
+    - Hidden service clients didn't use a cached service descriptor that
+      was older than 15 minutes, but wouldn't fetch a new one either,
+      because there was already one in the cache. Now, fetch a v2
+      descriptor unless the same descriptor was added to the cache within
+      the last 15 minutes. Fixes bug 997; reported by Marcus Griep.
+
+
 Changes in version 0.2.1.16-rc - 2009-06-20
   Tor 0.2.1.16-rc speeds up performance for fast exit relays, and fixes
   a bunch of minor bugs.

doc/tor-osx-dmg-creation.txt

@@ -1,31 +1,62 @@
 ## Instructions for building the official dmgs for OSX.
 ##
+## The loose table of contents:
+## Summary
+## Single Architecture Binaries for PPC or X86, not both.
+## Backwards compatible single-architecture binaries for OSX x86 10.4 from newer versions of OS X.
+## Universal Binaries for OSX PPC and X86
+## Each section is delineated by ###.
 
 The following steps are the exact steps used to produce the "official"
 OSX builds of tor.
 
-Summary:
+### Summary:
 1) Compile and install a static version of the latest release of
 libevent.
 2) Acquire and install your preferred version of tor. Extract.
 3) "make dist-osx"
 4) You now have a dmg from which you can install Tor.
 
-## Universal Binaries for OSX PPC and X86
-## This method works in OSX 10.4 (Tiger) and newer OSX versions.
-## See far below if you don't care about cross compiling for PPC and X86.
-## The single architecture process starts with "###"
+### Single Architecture Binaries for PPC or X86, not both.
+### This method works in all versions of OSX 10.3 through 10.6
+
+## Compiling libevent ##
+
+1)  Download the latest stable libevent from
+http://www.monkey.org/~provos/libevent/
+
+2) The first step of compiling libevent is to configure it as
+follows:
+       ./configure --enable-static --disable-shared
+
+3) Complete the "make" and "make install".  You will need to be root,
+or sudo -s, to complete the "make install".
+
+## Compiling Tor ##
+
+4) Get your preferred version of the tor source from https://www.torproject.org.  Extract the
+tarball.
+
+5) In the top level, this means /path/to/tor/, not tor/contrib/osx,
+do a configure with these parameters:
+     CONFDIR=/Library/Tor ./configure --prefix=/Library/Tor \
+     --bindir=/Library/Tor --sysconfdir=/Library
+
+6) In same top level dir, do a "make dist-osx".  There now exists a
+.dmg file in the same directory.  Install from this dmg.
+
+### Backwards compatible single-architecture binaries for OSX x86 10.4 from newer versions of OS X.
 
 1) Install the latest XCode updates available from http://developer.apple.com.
 
-## Compiling libevent
+## Compiling libevent ##
 
 2)  Download latest stable libevent from
 http://www.monkey.org/~provos/libevent/
 
 3) The first step of compiling libevent is to configure it as
 follows:
-CFLAGS="-O -g -mmacosx-version-min=10.4 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -arch i386 -arch ppc" \
+CFLAGS="-O -g -mmacosx-version-min=10.4 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -arch i386" \
 LDFLAGS="-Wl,-syslibroot,/Developer/SDKs/MacOSX10.4u.sdk" \
 ./configure --enable-static --disable-shared --disable-dependency-tracking
 
@@ -37,16 +68,14 @@ or sudo -s, to complete the "make install".
 	"file /usr/local/lib/libevent.a"
 
 	Your output should be:
-/usr/local/lib/libevent.a: Mach-O fat file with 2 architectures
 /usr/local/lib/libevent.a (for architecture i386):      current ar archive random library
-/usr/local/lib/libevent.a (for architecture ppc):       current ar archive
 
 6) Get your preferred version of the tor source from https://www.torproject.org/download.  
 Extract the tarball.
 
 7) In the top level, this means /path/to/tor/, not tor/contrib/osx,
 do a configure with these parameters:
-CFLAGS="-O -g -mmacosx-version-min=10.4 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -arch i386 -arch ppc" \
+CFLAGS="-O -g -mmacosx-version-min=10.4 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -arch i386" \
 LDFLAGS="-Wl,-syslibroot,/Developer/SDKs/MacOSX10.4u.sdk" \
 CONFDIR=/Library/Tor \
 ./configure --prefix=/Library/Tor --bindir=/Library/Tor \
@@ -56,39 +85,61 @@ CONFDIR=/Library/Tor \
 
 9) Confirm you have created a universal binary by issuing the follow command:
 "file src/or/tor".  Its output should be as follows:
-src/or/tor: Mach-O fat file with 2 architectures
 src/or/tor (for architecture i386):     Mach-O executable i386
-src/or/tor (for architecture ppc):      Mach-O executable ppc
 
 10) There should exist in the top-level directory a
 Tor-$VERSION-universal-Bundle.dmg
 
-11) Congrats.  You have a universal binary. You are now ready to install Tor.
+11) Congrats.  You have a backwards-compatible binary. You are now ready to install Tor.
 
-### Single Architecture Binaries for PPC or X86, not both.
-### This method works in all versions of OSX 10.3 through 10.5
+### Universal Binaries for OSX PPC and X86
+### This method works in OSX 10.4 (Tiger) and newer OSX versions.
+
+1) Install the latest XCode updates available from http://developer.apple.com.
 
-### Compiling libevent
+## Compiling libevent ##
 
-1)  Download the latest stable libevent from
+2)  Download latest stable libevent from
 http://www.monkey.org/~provos/libevent/
 
-2) The first step of compiling libevent is to configure it as
+3) The first step of compiling libevent is to configure it as
 follows:
-       ./configure --enable-static --disable-shared
+CFLAGS="-O -g -mmacosx-version-min=10.4 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -arch i386 -arch ppc" \
+LDFLAGS="-Wl,-syslibroot,/Developer/SDKs/MacOSX10.4u.sdk" \
+./configure --enable-static --disable-shared --disable-dependency-tracking
 
-3) Complete the "make" and "make install".  You will need to be root,
+4) Complete the "make" and "make install".  You will need to be root,
 or sudo -s, to complete the "make install".
 
-### Compiling Tor
+5) Check for a successful universal binary of libevent.a in, by default,
+/usr/local/lib by using the following command:
+	"file /usr/local/lib/libevent.a"
 
-4) Get your preferred version of the tor source from https://www.torproject.org.  Extract the
-tarball.
+	Your output should be:
+/usr/local/lib/libevent.a: Mach-O fat file with 2 architectures
+/usr/local/lib/libevent.a (for architecture i386):      current ar archive random library
+/usr/local/lib/libevent.a (for architecture ppc):       current ar archive
 
-5) In the top level, this means /path/to/tor/, not tor/contrib/osx,
+6) Get your preferred version of the tor source from https://www.torproject.org/download.  
+Extract the tarball.
+
+7) In the top level, this means /path/to/tor/, not tor/contrib/osx,
 do a configure with these parameters:
-     CONFDIR=/Library/Tor ./configure --prefix=/Library/Tor \
-     --bindir=/Library/Tor --sysconfdir=/Library
+CFLAGS="-O -g -mmacosx-version-min=10.4 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -arch i386 -arch ppc" \
+LDFLAGS="-Wl,-syslibroot,/Developer/SDKs/MacOSX10.4u.sdk" \
+CONFDIR=/Library/Tor \
+./configure --prefix=/Library/Tor --bindir=/Library/Tor \
+--sysconfdir=/Library --disable-dependency-tracking
 
-6) In same top level dir, do a "make dist-osx".  There now exists a
-.dmg file in the same directory.  Install from this dmg.
+8) "make dist-osx"
+
+9) Confirm you have created a universal binary by issuing the follow command:
+"file src/or/tor".  Its output should be as follows:
+src/or/tor: Mach-O fat file with 2 architectures
+src/or/tor (for architecture i386):     Mach-O executable i386
+src/or/tor (for architecture ppc):      Mach-O executable ppc
+
+10) There should exist in the top-level directory a
+Tor-$VERSION-universal-Bundle.dmg
+
+11) Congrats.  You have a universal binary. You are now ready to install Tor.

src/common/log.c

@@ -92,7 +92,8 @@ should_log_function_name(log_domain_mask_t domain, int severity)
 }
 
 /** A mutex to guard changes to logfiles and logging. */
-static tor_mutex_t *log_mutex = NULL;
+static tor_mutex_t log_mutex;
+static int log_mutex_initialized = 0;
 
 /** Linked list of logfile_t. */
 static logfile_t *logfiles = NULL;
@@ -103,9 +104,9 @@ static int syslog_count = 0;
 #endif
 
 #define LOCK_LOGS() STMT_BEGIN                                          \
-  tor_mutex_acquire(log_mutex);                                         \
+  tor_mutex_acquire(&log_mutex);                                        \
   STMT_END
-#define UNLOCK_LOGS() STMT_BEGIN tor_mutex_release(log_mutex); STMT_END
+#define UNLOCK_LOGS() STMT_BEGIN tor_mutex_release(&log_mutex); STMT_END
 
 /** What's the lowest log level anybody cares about?  Checking this lets us
  * bail out early from log_debug if we aren't debugging.  */
@@ -446,8 +447,9 @@ logs_free_all(void)
     log_free(victim);
   }
   tor_free(appname);
-  tor_mutex_free(log_mutex);
-  log_mutex = NULL;
+
+  /* We _could_ destroy the log mutex here, but that would screw up any logs
+   * that happened between here and the end of execution. */
 }
 
 /** Remove and free the log entry <b>victim</b> from the linked-list
@@ -543,8 +545,10 @@ add_stream_log(const log_severity_list_t *severity,
 void
 init_logging(void)
 {
-  if (!log_mutex)
-    log_mutex = tor_mutex_new();
+  if (!log_mutex_initialized) {
+    tor_mutex_init(&log_mutex);
+    log_mutex_initialized = 1;
+  }
 }
 
 /** Add a log handler to receive messages during startup (before the real