tor/doc/spec/proposals/114-distributed-storage.txt

Filename: 114-distributed-storage.txt
Title: Distributed Storage for Tor Hidden Service Descriptors
Version: $Revision$
Last-Modified: $Date$
Author: Karsten Loesing
Created: 13-May-2007
Status: Open

Change history:

  13-May-2007  Initial proposal
  14-May-2007  Added changes suggested by Lasse Øverlier
  30-May-2007  Changed descriptor format, key length discussion, typos
  09-Jul-2007  Incorporated suggestions by Roger, added status of specification
               and implementation for upcoming GSoC mid-term evaluation
  11-Aug-2007  Updated implementation statuses, included non-consecutive
               replication to descriptor format
  20-Aug-2007  Renamed config option HSDir as HidServDirectoryV2

Overview:

  The basic idea of this proposal is to distribute the tasks of storing and
  serving hidden service descriptors from currently three authoritative
  directory nodes among a large subset of all onion routers. The three
  reasons to do this are better robustness (availability), better
  scalability, and improved security properties. Further,
  this proposal suggests changes to the hidden service descriptor format to
  prevent new security threats coming from decentralization and to gain even
  better security properties.
  
Motivation:

  The current design of hidden services exhibits the following performance and
  security problems:

  First, the three hidden service authoritative directories constitute a
  performance bottleneck in the system. The directory nodes are responsible for
  storing and serving all hidden service descriptors. At the moment there are
  about 1000 descriptors at a time, but this number is assumed to increase in
  the future. Further, there is no replication protocol for descriptors between
  the three directory nodes, so that hidden services must ensure the
  availability of their descriptors by manually publishing them on all
  directory nodes. Whenever a fourth or fifth hidden service authoritative
  directory is added, hidden services will need to maintain an equally
  increasing number of replicas. These scalability issues have an impact on the
  current usage of hidden services and put an even higher burden on the
  development of new kinds of applications for hidden services that might
  require storing even more descriptors.

  Second, besides posing a limitation to scalability, storing all hidden
  service descriptors on three directory nodes also constitutes a security
  risk. The directory node operators could easily analyze the publish and fetch
  requests to derive information on service activity and usage and read the
  descriptor contents to determine which onion routers work as introduction
  points for a given hidden service and need to be attacked or threatened to
  shut it down. Furthermore, the contents of a hidden service descriptor offer
  only minimal security properties to the hidden service. Whoever gets aware of
  the service ID can easily find out whether the service is active at the
  moment and which introduction points it has. This applies to (former)
  clients, (former) introduction points, and of course to the directory nodes.
  It requires only to request the descriptor for the given service ID, which
  can be performed by anyone anonymously.

  This proposal suggests two major changes to approach the described
  performance and security problems:

  The first change affects the storage location for hidden service descriptors.
  Descriptors are distributed among a large subset of all onion routers instead
  of three fixed directory nodes. Each storing node is responsible for a subset
  of descriptors for a limited time only. It is not able to choose which
  descriptors it stores at a certain time, because this is determined by its
  onion ID which is hard to change frequently and in time (only routers which
  are stable for a given time are accepted as storing nodes). In order to
  resist single node failures and untrustworthy nodes, descriptors are
  replicated among a certain number of storing nodes. A first replication
  protocol makes sure that descriptors don't get lost when the node population
  changes; therefore, a storing node periodically requests the descriptors from
  its siblings. A second replication protocol distributes descriptors among
  non-consecutive nodes of the ID ring to prevent a group of adversaries from
  generating new onion keys until they have consecutive IDs to create a 'black
  hole' in the ring and make random services unavailable. Connections to
  storing nodes are established by extending existing circuits by one hop to
  the storing node. This also ensures that contents are encrypted. The effect
  of this first change is that the probability that a single node operator
  learns about a certain hidden service is very small and that it is very hard
  to track a service over time, even when it collaborates with other node
  operators.
  
  The second change concerns the content of hidden service descriptors.
  Obviously, security problems cannot be solved only by decentralizing storage;
  in fact, they could also get worse if done without caution. At first, a
  descriptor ID needs to change periodically in order to be stored on changing
  nodes over time. Next, the descriptor ID needs to be computable only for the
  service's clients, but should be unpredictable for all other nodes. Further,
  the storing node needs to be able to verify that the hidden service is the
  true originator of the descriptor with the given ID even though it is not a
  client. Finally, a storing node should learn as little information as
  necessary by storing a descriptor, because it might not be as trustworthy as
  a directory node; for example it does not need to know the list of
  introduction points. Therefore, a second key is applied that is only known to
  the hidden service provider and its clients and that is not included in the
  descriptor. It is used to calculate descriptor IDs and to encrypt the
  introduction points. This second key can either be given to all clients
  together with the hidden service ID, or to a group or a single client as
  an authentication token. In the future this second key could be the result of
  some key agreement protocol between the hidden service and one or more
  clients. A new text-based format is proposed for descriptors instead of an
  extension of the existing binary format for reasons of future extensibility.

Design:

  The proposed design is described by the required changes to the current
  design. These requirements are grouped by content, rather than by affected
  specification documents or code files, and numbered for reference below.

  Hidden service clients, servers, and directories:

  /1/ Create routing list

    All participants can filter the consensus status document received from the
    directory authorities to one routing list containing only those servers
    that store and serve hidden service descriptors and which are running for
    at least 24 hours. A participant only trusts its own routing list and never
    learns about routing information from other parties.

    - rend-spec.txt, section 1.4: Added description of how to obtain a routing
      list of hidden service directories.

    - routerparse.c: Changed routerstatus_parse_entry_from_string to parse the
      "HSDir" flag in vote and consensus status documents.
    - routerlist.c: Changed router_get_routerlist() to initialize routing list.
    - or.h: Added hs_dirs member to routerlist_t.

    - Changed routerlist_free() to free storage held by routing list.
    - Added UPDATE_HS_DIRS_INTERVAL.
    - Added update_hs_dir_routing_table().
    - Changed run_scheduled_events().
    - Added is_hs_dir member to routerstatus_t.
    
      [Aug 11: Specified and running.]

  /2/ Determine responsible hidden service directory

    All participants can determine the hidden service directory that is
    responsible for storing and serving a given ID, as well as the hidden
    service directories that replicate its content. Every hidden service
    directory is responsible for the descriptor IDs in the interval from
    its predecessor, exclusive, to its own ID, inclusive. Further, a hidden
    service directory holds replicas for its n predecessors, where n denotes
    the number of consecutive replicas. (requires /1/)
    
    - rend-spec.txt, section 1.4: Added description of how to determine the
      responsible node(s) for a given descriptor ID.

    - routerlist.c: Added get_responsible_hs_dirs() to determine the routers
      that are responsible for a given descriptor ID.
      
    - Added is_hs_dir member to routerstatus_t.
    - Added have_enough_hs_dirs().
    - Added next_hs_dir().
    
      [July 9: Specified and running.]
    
  Hidden service clients and providers:

  /3/ Send tunneled HTTP request to hidden service directory in BEGIN_DIR cell

    - rend-spec.txt, section 1.4: Added the requirement that requests need to
      be sent via Tor.
    - rend-spec.txt, section 1.6: Added the requirement that requests need to
      be sent via Tor.

    [July 9: Pending]

  Hidden service directory nodes:

  /4/ Process tunneled HTTP request in BEGIN_DIR cell

    - rend-spec.txt, section 3.2: Added the requirement that requests need to
      be contained within BEGIN_DIR cells.
    - rend-spec.txt, section 3.3: Added the requirement that requests need to
      be contained within BEGIN_DIR cells.
  
    [July 9: Pending]
    
  /5/ Advertise hidden service directory functionality

    Every onion router that has its directory port open can decide whether it
    wants to store and serve hidden service descriptors by setting a new config
    option "HidServDirectoryV2" 0|1 to 1. An onion router with this config
    option being set includes the flag "hidden-service-dir" in its router
    descriptors that it sends to directory authorities.

    - tor.1.in: Added the config option HidServDirectoryV2.
    - dir-spec.txt, section 2.1: Added the flag hidden-service-dir to the
      router descriptor format.
    - rend-spec.txt, section 3.1: Added process of configuring a hidden service
      directory.

    - router.c: Changed router_dump_router_to_string() to include the
      hidden-service-dir flag in a router descriptor if configured.
    - or.h: Added HidServDirectoryV2 to or_options_t.
    - config.c: Added config option HidServDirectoryV2.

      [July 9: Specified and running.]
      
  /6/ Accept v2 publish requests, parse and store v2 descriptors

    Hidden service directory nodes accept publish requests for hidden service
    descriptors and store them to their local memory. (It is not necessary to
    make descriptors persistent, because after disconnecting, the onion router
    would not be accepted as storing node anyway, because it has not been
    running for at least 24 hours.) All requests and replies are formatted as
    HTTP messages. Requests are directed to the router's directory port and are
    contained within BEGIN_DIR cells. A hidden service directory node stores a
    descriptor only when it thinks that it is responsible for storing that
    descriptor based on its own routing table. Every hidden service directory
    node is responsible for the descriptor IDs in the interval of its n-th
    predecessor in the ID circle up to its own ID (n denotes the number of
    consecutive replicas). (requires /1/ and /4/)

    - rend-spec.txt, section 1.2: Added the new v2 hidden service descriptor
      format.
    - rend-spec.txt, section 3.2: Added the acceptance of v2 publish requests.

    - routerparse.c: Added rend_parse_v2_service_descriptor() to parse a v2
      hidden service descriptor.
    - routerparse.c: Added desc_token_table[] to parse v2 hidden service
      descriptors.
    - routerparse.c: Added 8 keywords to directory_keyword to parse v2 hidden
      service descriptors.
    - rendcommon.c: Added rend_cache_store_v2_dir() to allow a hidden service
      directory to parse a v2 descriptor and store it in the local cache under
      its descriptor ID instead of its service ID.
    - or.h: Added constant REND_DESC_ID_V2_LEN to reflect that v2 descriptor
      IDs are longer than v0/1 onion addresses.

    - Changed directory_handle_command_post().
    
      [Aug 11: Specified and running.]

  /7/ Accept v2 fetch requests

    Same as /6/, but with fetch requests for hidden service descriptors.
    (requires /2/ and /4/)

    - rend-spec.txt, section 3.3: Added the processing of v2 fetch requests.

    - rendcommon.c: Added rend_cache_lookup_v2_dir() to allow a hidden service
      directory to look up a v2 descriptor in the local cache under its
      descriptor ID instead of its service ID.
    - or.h: Added constant REND_DESC_ID_V2_LEN to reflect that v2 descriptor
      IDs are longer than v0/1 onion addresses.

    - Changed directory_handle_command_get().
    
      [Aug 11: Specified and running.]

  /8/ Replicate descriptors with neighbors

    A hidden service directory node replicates descriptors from its two
    predecessors by downloading them once an hour. Further, it checks its
    routing table periodically for changes. Whenever it realizes that a
    predecessor has left the network, it establishes a connection to the new
    n-th predecessor and requests its stored descriptors in the interval of its
    (n+1)-th predecessor and the requested n-th predecessor. Whenever it
    realizes that a new onion router has joined with an ID higher than its
    former n-th predecessor, it adds it to its predecessors and discards all
    descriptors in the interval of its (n+1)-th and its n-th predecessor.
    (requires /1/)

    - rend-spec.txt, section 3.3: Added the replication of v2 descriptors.

    - Added HS_DIR_REPLICATION_INTERVAL.
    - Added next_hs_dir and previous_hs_dir.
    - Changed directory_handle_command_get().
    - Changed run_scheduled_events.
    - Added hs_dir_perform_replication().
    - Added rend_cache_lookup_v2_replicas.
    - Added DIR_PURPOSE_REPLICATE_RENDDESC_V2.
    - Changed directory_initiate_command.
    - directory_send_command.
    - Changed connection_dir_client_reached_eof.

      [Aug 11: To some extend specified, running.]

  Authoritative directory nodes:

  /9/ Confirm a router's hidden service directory functionality

    Directory nodes include a new flag "HSDir" for routers that decided to
    provide storage for hidden service descriptors and that are running for at
    least 24 hours. The last requirement prevents a node from frequently
    changing its onion key to become responsible for an identifier it wants to
    target.

    - dir-spec.txt, section 3.2: Added the status flag "HSDir" to the vote and
      consensus status document format.
    - dir-spec.txt, section 3.3: Added a rule for how an authority decides
      whether a router is assigned the flag "HSDir".
    - rend-spec.txt, section 3.1: Added the decision on whether an onion router
      is confirmed to act as hidden service directory or not.

    - routerparse.c: Changed router_parse_entry_from_string() to parse the
      "hidden-service-dir" flag in router descriptors.
    - routerparse.c: Added an entry to routerdesc_token_table[] to parse the
      "hidden-service-directory" flag in router descriptors.
    - routerparse.c: Added 1 keyword to directory_keyword to parse the
      "hidden-service-dir" flag in router descriptors.
    - or.h: Added is_hs_dir and wants_to_be_hs_dir members to routerinfo_t.
    - dirserv.c: Changed routerstatus_format_entry() to include the "HSDir"
      flag in vote and consensus status documents.
    - dirserv.c: Changed set_routerstatus_from_routerinfo() to set the "HSDir"
      flag.

    - Added dirserv_thinks_router_is_hs_dir().
    - Added MIN_UPTIME_HS_DIR and HS_DIR_REACHABLE_TIMEOUT.

      [Aug 11: Specified and running.]

  Hidden service provider:

  /10/ Configure v2 hidden service

    Each hidden service provider that has set the config option
    "PublishV2HidServDescriptors" 0|1 to 1 is configured to publish v2
    descriptors and conform to the v2 connection establishment protocol. When
    configuring a hidden service, a hidden service provider checks if it has
    already created a random secret_cookie and a hostname2 file; if not, it
    creates both of them. (requires /2/)

    - tor.1.in: Added the config option PublishV2HidServDescriptors.
    - tor.1.in: Added the files hostname2 and secret_cookie.
    - rend-spec.txt, section 1.1: Added requirement to create secret_cookie and
      hostname2 file.

    - rendservice.c: Added rend_get_hostname2() to assemble a v2 onion address.
    - rendservice.c: Changed rend_service_load_keys() to write a secret_cookie
      and a hostname2 file.
    - rendservice.c: Extended rend_service_t by a member secret_cookie.
    - or.h: Added PublishV2HidServDescriptors to or_options_t.
    - config.c: Added config option PublishV2HidServDescriptors.

      [July 9: Specified and running.]

  /11/ Establish introduction points with fresh key

    If configured to publish only v2 descriptors and no v0/v1 descriptors any
    more, a hidden service provider that is setting up the hidden service at
    introduction points does not pass its own public key, but the public key
    of a freshly generated key pair. It also includes these fresh public keys
    in the hidden service descriptor together with the other introduction point
    information. The reason is that the introduction point does not need to and
    therefore should not know for which hidden service it works, so as to
    prevent it from tracking the hidden service's activity. (If a hidden
    service provider supports both, v0/v1 and v2 descriptors, v0/v1 clients
    rely on the fact that all introduction points accept the same public key,
    so that this new feature cannot be used.)

    - rend-spec.txt, section 1.3: Instead of Bob's public key, the hidden
      service provider uses a freshly generated public key for every
      introduction point.

    - TODO: Change in rend_encode_v2_descriptors.

      [July 9: Specified, but not yet implemented.]

  /12/ Encode v2 descriptors and send v2 publish requests

    If configured to publish v2 descriptors, a hidden service provider
    publishes a new descriptor whenever its content changes or a new
    publication period starts for this descriptor. If the current publication
    period would only last for less than 60 minutes (= 2 x 30 minutes to allow
    the server to be 30 minutes behind and the client 30 minutes ahead), the
    hidden service provider publishes both a current descriptor and one for
    the next period. Publication is performed by sending the descriptor to all
    hidden service directories that are responsible for keeping replicas for
    the descriptor ID. This includes two non-consecutive replicas that are
    stored at 3 consecutive nodes each. (requires /1/, /2/, and /3/)

    - rend-spec.txt, section 1.2: Added the new v2 hidden service descriptor
      format.
    - rend-spec.txt, section 1.4: Bob's OP does not only upload v0/v1 service
      descriptors to the authoritative directories, but also v2 service
      descriptors to the hidden service directories.

    - rendservice.c: Changed upload_service_descriptor() to upload v2 hidden
      service descriptors, if configured.
    - rendservice.c: Changed rend_consider_services_upload() to also initiate
      the upload of v2 descriptors, if configured.
    - rendservice.c: Extended rend_service_t by a member secret_cookie.
    - rendcommon.c: Added rend_encode_v2_descriptor() to encode a v2
      descriptor.
    - or.h: Added constant DIR_PURPOSE_UPLOAD_RENDDESC_V2.
    - directory.c: Added directory_post_to_hs_dir().
    - directory.c: Changed directory_initiate_command() to also recognize v2
      publish requests.
    - directory.c: Changed directory_send_command() to also prepare v2 publish
      requests.
    - crypto.c: Added implementation for crypto_cipher_encrypt_cbc().

    - Changed connection_dir_client_reached_eof().

      [Aug 11: Specified and running.]

  Hidden service client:

  /13/ Send v2 fetch requests

    A hidden service client that has set the config option
    "FetchV2HidServDescriptors" 0|1 to 1 handles SOCKS requests for v2 onion
    addresses by requesting a v2 descriptor from a randomly chosen hidden
    service directory that is responsible for keeping replica for the
    descriptor ID. In total there are six replicas of which the first and the
    last three are stored on consecutive nodes. The probability of picking one
    of the three consecutive replicas is 1/6, 2/6, and 3/6 to incorporate the
    fact that the availability will be the highest on the node with next higher
    ID. A hidden service client relies on the hidden service provider to store
    two sets of descriptors to compensate clock skew between service and
    client. (requires /1/, /2/, and /3/)

    - tor.1.in: Added the config option FetchV2HidServDescriptors.
    - rend-spec.txt, section 1.5: Added the new v2 onion address format.
    - rend-spec.txt, section 1.6: Alice's OP downloads the service descriptors
      similarly as Bob's OP uploaded them in 1.4.

    - rendcommon.c: Changed rend_cache_lookup_entry to enable it to also lookup
      v2 descriptors.
    - rendcommon.c: Added rend_compute_v2_desc_id() to generate v2 descriptor IDs
      from v2 onion addresses.
    - rendcommon.c: Changed rend_valid_service_id() to also consider v2 onion
      addresses as valid and return the version number of the request (0 or 2).
    - rendclient.c: Added rend_client_refetch_v2_renddesc() to fetch v2 service
      descriptors using the secret cookie.
    - rendclient.c: Changed rend_client_remove_intro_point() to copy the secret
      cookie if the local descriptor has expired or there are no introduction
      points left.
    - or.h: Added FetchV2HidServDescriptors to or_options_t.
    - or.h: Added constant REND_DESC_ID_V2_LEN to reflect that v2 descriptor
      IDs are longer than v0/1 onion addresses.
    - or.h: Added constant DIR_PURPOSE_FETCH_RENDDESC_V2.
    - directory.c: Added directory_get_from_hs_dir().
    - directory.c: Changed directory_initiate_command() to also recognize v2
      fetch requests.
    - directory.c: Changed directory_send_command() to also prepare v2 fetch
      requests.
    - connection_edge.c: Changed connection_ap_handshake_rewrite_and_attach()
      to fetch v2 service descriptors.
    - connection_edge.c: Changed parse_extended_hostname() to accept both,
      current and v2 onion addresses.
    - config.c: Added config options FetchV2HidServDescriptors.

      [Aug 11: Base version specified and running, but no memory of failed
       hidden service directories, yet.]

  /14/ Process v2 fetch reply and parse v2 descriptors

    A hidden service client that has sent a request for a v2 descriptor can
    parse it and store it to the local cache of rendezvous service descriptors.

    - rend-spec.txt, section 1.2: Added the new v2 hidden service descriptor
      format.
    - rend-spec.txt, section 1.6: Alice's OP parses the reply received from the
      hidden service directory.

    - routerparse.c: Added rend_parse_v2_service_descriptor() to parse a v2
      hidden service descriptor.
    - routerparse.c: Added rend_decrypt_introduction_points() to decrypt and
      parse the list of introduction points.
    - routerparse.c: Added ipo_token_table[] to parse the decrypted
      introduction points of v2 hidden service descriptors.
    - routerparse.c: Added desc_token_table[] to parse v2 hidden service
      descriptors.
    - routerparse.c: Added 8 keywords to directory_keyword to parse v2 hidden
      service descriptors, and 5 to parse the decrypted list of introduction
      points.
    - rendcommon.c: Added rend_cache_store_v2_client() to parse a v2 descriptor
      and parse the encrypted list of introduction points.
    - or.h: Added rend_version and secret_cookie to edge_connection_t, to
      dir_connection_t, and to origin_circuit_t to be able to decrypt
      introduction points when receiving a v2 descriptor.
    - directory.c: Changed connection_dir_client_reached_eof() to also parse v2
      fetch replies.
    - crypto.c: Added implementation for crypto_cipher_decrypt_cbc().

      [July 9: Specified and running.]

  /15/ Establish connection to v2 hidden service

    A hidden service client can establish a connection to a hidden service
    using a v2 descriptor. This includes using the secret cookie for decrypting
    the introduction points contained in the descriptor. When contacting an
    introduction point, the client does not use the public key of the hidden
    service provider, but the freshly-generated public key that is included in
    the hidden service descriptor. Whether or not a fresh key is used instead
    of the key of the hidden service depends on the available protocol versions
    that are included in the descriptor; by this, connection establishment is
    to a certain extend decoupled from fetching the descriptor.

    - rend-spec.txt, section 1.8: Alice uses the public key that is included in
      the descriptor instead of Bob's permanent service key.

    - rendclient.c: Changed rend_client_introduction_acked() to copy the secret
      cookie in case the introduction point denied the request.
    - rendclient.c: Changed rend_client_remove_intro_point() to copy the secret
      cookie if the local descriptor has expired or there are no introduction
      points left.
    - or.h: Added secret_cookie to edge_connection_t, to dir_connection_t, and
      to origin_circuit_t to be able to decrypt introduction points when
      receiving a v2 descriptor.
    - circuitlist.c: Changed _circuit_mark_for_close() to pass the secret
      cookie to rend_client_remove_intro_point() when an intro circ has failed.
    - circuituse.c: Changed circuit_get_open_circ_or_launch() to fetch a v2
      descriptor with the secret cookie, if no descriptor is available, or copy
      the secret cookie to the circuit, in case it dies later, so that it can
      be used to fetch a new descriptor.

      [July 9: Base version specified and running, but without fresh key.]
      
  Hidden service descriptor:

  (Requirements concerning the descriptor format are contained in /6/ and /7/.)
  
    The new v2 hidden service descriptor format looks like this:

      onion-address = h(public-key) + cookie
      descriptor-id = h(h(public-key) + h(time-period + cookie + relica))
      descriptor-content = {
        descriptor-id,
        version,
        public-key,
        h(time-period + cookie + replica),
        timestamp,
        protocol-versions,
        { introduction-points } encrypted with cookie
      } signed with private-key

    The "descriptor-id" needs to change periodically in order for the
    descriptor to be stored on changing nodes over time. It may only be
    computable by a hidden service provider and all of his clients to prevent
    unauthorized nodes from tracking the service activity by periodically
    checking whether there is a descriptor for this service. Finally, the
    hidden service directory needs to be able to verify that the hidden service
    provider is the true originator of the descriptor with the given ID.
    
    Therefore, "descriptor-id" is derived from the "public-key" of the hidden
    service provider, the current "time-period" which changes every 24 hours,
    a secret "cookie" shared between hidden service provider and clients, and
    a "replica" denoting the number of this non-consecutive replica. (The
    "time-period" is constructed in a way that time periods do not change at
    the same moment for all descriptors by deriving a value between 0:00 and
    23:59 hours from h(public-key) and making the descriptors of this hidden
    service provider expire at that time of the day.) The "descriptor-id" is
    defined to be 160 bits long. [extending the "descriptor-id" length
    suggested by LØ]
    
    Only the hidden service provider and the clients are able to generate
    future "descriptor-ID"s. Hence, the "onion-address" is extended from now 
    the hash value of "public-key" by the secret "cookie". The "public-key" is
    determined to be 80 bits long, whereas the "cookie" is dimensioned to be
    120 bits long. This makes a total of 200 bits or 40 base32 chars, which is
    quite a lot to handle for a human, but necessary to provide sufficient
    protection against an adversary from generating a key pair with same
    "public-key" hash or guessing the "cookie".
    
    A hidden service directory can verify that a descriptor was created by the
    hidden service provider by checking if the "descriptor-id" corresponds to
    the "public-key" and if the signature can be verified with the
    "public-key".

    The "introduction-points" that are included in the descriptor are encrypted
    using the same "cookie" that is shared between hidden service provider and
    clients. [correction to use another key than h(time-period + cookie) as
    encryption key for introduction points made by LØ]

    A new text-based format is proposed for descriptors instead of an extension
    of the existing binary format for reasons of future extensibility.

Security implications:

  The security implications of the proposed changes are grouped by the roles of
  nodes that could perform attacks or on which attacks could be performed.

  Attacks by authoritative directory nodes

    Authoritative directory nodes are no longer the single places in the
    network that know about a hidden service's activity and introduction
    points. Thus, they cannot perform attacks using this information, e.g.
    track a hidden service's activity or usage pattern or attack its
    introduction points. Formerly, it would only require a single corrupted
    authoritative directory operator to perform such an attack.

  Attacks by hidden service directory nodes

    A hidden service directory node could misuse a stored descriptor to track a
    hidden service's activity and usage pattern by clients. Though there is no
    countermeasure against this kind of attack, it is very expensive to track a
    certain hidden service over time. An attacker would need to run a large
    number of stable onion routers that work as hidden service directory nodes
    to have a good probability to become responsible for its changing
    descriptor IDs. For each period, the probability is:

      1-(N-c choose r)/(N choose r) for N-c>=r and 1 otherwise, with N
      as total
      number of hidden service directories, c as compromised nodes, and r as
      number of replicas

    The hidden service directory nodes could try to make a certain hidden
    service unavailable to its clients. Therefore, they could discard all
    stored descriptors for that hidden service and reply to clients that there
    is no descriptor for the given ID or return an old or false descriptor
    content. The client would detect a false descriptor, because it could not
    contain a correct signature. But an old content or an empty reply could
    confuse the client. Therefore, the countermeasure is to replicate
    descriptors among a small number of hidden service directories, e.g. 5.
    The probability of a group of collaborating nodes to make a hidden service
    completely unavailable is in each period:

      (c choose r)/(N choose r) for c>=r and N>=r, and 0 otherwise,
      with N as total
      number of hidden service directories, c as compromised nodes, and r as
      number of replicas

    A hidden service directory could try to find out which introduction points
    are working on behalf of a hidden service. In contrast to the previous
    design, this is not possible anymore, because this information is encrypted
    to the clients of a hidden service.

  Attacks on hidden service directory nodes

    An anonymous attacker could try to swamp a hidden service directory with
    false descriptors for a given descriptor ID. This is prevented by requiring
    that descriptors are signed.

    Anonymous attackers could swamp a hidden service directory with correct
    descriptors for non-existing hidden services. There is no countermeasure
    against this attack. However, the creation of valid descriptors is more
    expensive than verification and storage in local memory. This should make
    this kind of attack unattractive.

  Attacks by introduction points

    Current or former introduction points could try to gain information on the
    hidden service they serve. But due to the fresh key pair that is used by
    the hidden service, this attack is not possible anymore.

  Attacks by clients

    Current or former clients could track a hidden service's activity, attack
    its introduction points, or determine the responsible hidden service
    directory nodes and attack them. There is nothing that could prevent them
    from doing so, because honest clients need the full descriptor content to
    establish a connection to the hidden service. At the moment, the only
    countermeasure against dishonest clients is to change the secret cookie and
    pass it only to the honest clients.

Compatibility:

  The proposed design is meant to replace the current design for hidden service
  descriptors and their storage in the long run.

  There should be a first transition phase in which both, the current design
  and the proposed design are served in parallel. Onion routers should start
  serving as hidden service directories, and hidden service providers and
  clients should make use of the new design if both sides support it. Hidden
  service providers should be allowed to publish descriptors of the current
  format in parallel, and authoritative directories should continue storing and
  serving these descriptors.

  After the first transition phase, hidden service providers should stop
  publishing descriptors on authoritative directories, and hidden service
  clients should not try to fetch descriptors from the authoritative
  directories. However, the authoritative directories should continue serving
  hidden service descriptors for a second transition phase. As of this point,
  all v2 config options should be set to a default value of 1.

  After the second transition phase, the authoritative directories should stop
  serving hidden service descriptors.

Specification:

  The proposed changes affect multiple sections in several specification
  documents that are only mentioned in the following. (As for now, all changes
  to specification documents are limited to the SVN branch 114-dist-storage.)

  tor.1.in

    Added the config options HidServDirectoryV2 (/5/),
    PublishV2HidServDescriptors (/10/), and FetchV2HidServDescriptors (/13/).

    Added the files hostname2 and secret_cookie (/10/).

  dir-spec.txt

    2.1  Added the flag hidden-service-dir to the router descriptor format
    (/5/).

    3.2  Added the status flag HSDir to the vote and consensus status
    document format (/9/).

    3.3  Added a rule for how an authority decides whether a router is assigned
    the flag HSDir (/9/).

  rend-spec.txt

    0.4  Added history

    1.1  Added requirement to create secret_cookie and hostname2 file (/10/).

    1.2  Added the new v2 hidden service descriptor format (/6/, /12/ and
    /14/).

    1.3  Instead of Bob's public key, the hidden service provider uses a
    freshly generated public key for every introduction point (/11/).

    1.4  Added description of how to obtain a routing list of hidden service
    directories (/1/).

    1.4  Added description of how to determine the responsible node(s) for a
    given descriptor ID (/2/).

    1.4  Bob's OP does not only upload v0/v1 service descriptors to the
    authoritative directories, but also v2 service descriptors to the hidden
    service directories (/12/).

    1.4  Added the requirement that requests need to be sent via Tor (/3/).

    1.5  Added the new v2 onion address format (/13/).

    1.6  Added the requirement that requests need to be sent via Tor (/3/).

    1.6  Alice's OP downloads the service descriptors similarly as Bob's OP
    uploaded them in 1.4 (/13/).
 
    1.6  Alice's OP parses the reply received from the hidden service directory
    (/14/).

    1.8  Alice uses the public key that is included in the descriptor instead
    of Bob's permanent service key (/15/).

    3.1: Added process of configuring a hidden service directory (/5/).

    3.1: Added the decision on whether an onion router is confirmed to act as
    hidden service directory or not (/9/).

    3.2: Added the requirement that requests need to be contained within
    BEGIN_DIR cells (/4/).

    3.2: Added the acceptance of v2 publish requests (/6/).

    3.3: Added the requirement that requests need to be contained within
    BEGIN_DIR cells (/4/).
  
    3.3: Added the processing of v2 fetch requests (/7/).

    3.3: Added the replication of v2 descriptors (/8/).

Implementation:

  The proposed changes affect the following changes in the source code. (As for
  now, all changes to code are limited to the SVN branch 114-dist-storage.)

  container.h

    Added prototype for smartlist_digest_next_circular() (/2/).

  container.c

    Added implementation for smartlist_digest_next_circular() (/2/).

  crypto.h

    Added 3 prototypes according to the changes in crypto.c (various
    requirements).

  crypto.c

    Added implementation for crypto_cipher_encrypt_cbc() (/12/).

    Added implementation for crypto_cipher_decrypt_cbc() (/14/).

    Added implementation for base32_decode() (various requirements).

  circuitlist.c

    Changed _circuit_mark_for_close() to pass the secret cookie to
    rend_client_remove_intro_point() when an intro circ has failed (/15/).

  circuituse.c

    Changed circuit_get_open_circ_or_launch() to fetch a v2 descriptor with the
    secret cookie, if no descriptor is available, or copy the secret cookie to
    the circuit, in case it dies later, so that it can be used to fetch a new
    descriptor (/15/).

  config.c

    Added config options FetchV2HidServDescriptors (/13/),
    HidServDirectoryV2 (/5/), and PublishV2HidServDescriptors (/10/).

  connection_edge.c

    Changed connection_ap_handshake_rewrite_and_attach() to fetch v2 service
    descriptors (/13/).

    Changed parse_extended_hostname() to accept both, current and v2 onion
    addresses (/13/).

  directory.c

    Added directory_post_to_hs_dir() (/12/).

    Added directory_get_from_hs_dir() (/13/).

    Changed directory_initiate_command() to also recognize v2 publish (/12/)
    and fetch (/13/) requests.

    Changed directory_send_command() to also prepare v2 publish (/12/) and
    fetch (/13/) requests.

    Changed connection_dir_client_reached_eof() to also parse v2 fetch replies
    (/14/).

    Changed directory_handle_command_get() to handle v2 fetch requests (/13/).

    Changed directory_handle_command_post() to handle v2 publish requests
    (/12/).

  dirserv.c

    Changed routerstatus_format_entry() to include the "HSDir" flag in vote and
    consensus status documents (/9/).

    Changed set_routerstatus_from_routerinfo() to set the "HSDir" flag (/9/).

  or.h

    Added constants DIR_PURPOSE_UPLOAD_RENDDESC_V2 (/12/) and
    DIR_PURPOSE_FETCH_RENDDESC_V2 (/13/).

    Added constant REND_DESC_ID_V2_LEN to reflect that v2 descriptor IDs are
    longer than v0/1 onion addresses (/6/, /7/, and /13/).

    Added rend_version and secret_cookie to edge_connection_t, to
    dir_connection_t, and to origin_circuit_t to be able to decrypt
    introduction points when receiving a v2 descriptor (/14/ and /15/).

    Added is_hs_dir member to routerinfo_t and to routerstatus_t (/9/).

    Added hs_dirs member to routerlist_t (/1/).

    Added FetchV2HidServDescriptors (/13/), HidServDirectoryV2 (/5/), and
    PublishV2HidServDescriptors (/10/) to or_options_t.

    Added 7 new members to rend_service_descriptor_t to store v2-specific
    information (/12/, /14/, and /15/).

    Added 11 prototypes and changed the signature of 1 according to the
    changes in .c files (various requirements).

  rendclient.c

    Changed rend_client_introduction_acked() to copy the secret cookie in case
    the introduction point denied the request (/15/).

    Added rend_client_refetch_v2_renddesc() to fetch v2 service descriptors
    using the secret cookie (/13/).

    Changed rend_client_remove_intro_point() to copy the secret cookie if the
    local descriptor has expired or there are no introduction points left (/13/
    and /15/).

  rendcommon.c

    Added rend_compute_v2_descriptor_fields() to prepare the encoding of a v2
    descriptor (/12/).

    Added rend_compute_desc_id() to generate v2 descriptor IDs from v2 onion
    addresses (/13/).

    Added rend_encode_v2_descriptor() to encode a v2 descriptor (/12/).

    Changed rend_valid_service_id() to also consider v2 onion addresses as
    valid and return the version number of the request (1 or 2) (/13/).

    Changed rend_cache_lookup_entry to enable it to also lookup v2 descriptors
    (/13/).

    Added rend_cache_lookup_v2_dir() to allow a hidden service directory to
    look up a v2 descriptor in the local cache under its descriptor ID instead
    of its service ID (/7/).

    Moved the parsing part from rend_cache_store() to the new function
    rend_cache_store_parse() to reuse it for v2 descriptors (/6/).

    Added rend_cache_store_v2_client() to parse a v2 descriptor and parse the
    encrypted list of introduction points (/14/).

    Added rend_cache_store_v2_dir() to allow a hidden service directory to
    store a v2 descriptor in the local cache under its descriptor ID instead of
    its service ID (/6/).

  rendservice.c

    Extended rend_service_t by a member secret_cookie (/10/ and /12/).

    Added rend_get_hostname2() to assemble a v2 onion address (/10/).

    Changed rend_service_load_keys() to write a secret_cookie and a hostname2
    file (/10/).

    Changed upload_service_descriptor() to upload v2 hidden service
    descriptors, if configured (/12/).

    Changed rend_consider_services_upload() to also initiate the upload of v2
    descriptors, if configured (/12/).

  router.c

    Changed router_dump_router_to_string() to include the "hidden-service-dir"
    flag in a router descriptor if configured (/5/).

  routerlist.c

    Changed router_get_routerlist() to initialize routing list (/1/).

    Added get_responsible_hs_dir() to determine the router that is responsible
    for a given descriptor ID (/2/).

  routerparse.c

    Added 14 keywords to directory_keyword; 1 to parse the "hidden-service-dir"
    flag in router descriptors (/9/), 8 to parse v2 hidden service descriptors
    (/6/ and /14/), and 5 to parse the decrypted list of introduction points
    (/14/).

    Added an entry to routerdesc_token_table[] to parse the
    "hidden-service-directory" flag in router descriptors (/9/).

    Added desc_token_table[] to parse v2 hidden service descriptors (/6/ and
    /14/).

    Added ipo_token_table[] to parse the decrypted introduction points of v2
    hidden service descriptors (/14/).

    Changed router_parse_entry_from_string() to parse the "hidden-service-dir"
    flag in router descriptors (/9/).

    Changed routerstatus_parse_entry_from_string to parse the "HSDir" flag in
    vote and consensus status documents (/1/).

    Added rend_parse_v2_service_descriptor() to parse a v2 hidden service
    descriptor (/6/ and /14/).

    Added rend_decrypt_introduction_points() to decrypt and parse the list of
    introduction points (/14/).

Test: 

  The changes were tested via test functions in test.c for separate,
  short-running functionality and using an automatic validation based on
  PuppeTor.