tor/doc/spec/bridges-spec.txt

                          Tor bridges specification

0. Preface

  This document describes the design decisions around support for bridge
  users, bridge relays, and bridge authorities. It acts as an overview
  of the bridge design and deployment for developers, and it also tries
  to point out limitations in the current design and implementation.

  For more details on what all of these mean, look at blocking.tex in
  /doc/design-paper/

1. Bridge relays

  Bridge relays are just like normal Tor relays except they don't publish
  their server descriptors to the main directory authorities.

1.1. PublishServerDescriptor

  To configure your relay to be a bridge relay, just add
    BridgeRelay 1
    PublishServerDescriptor bridge
  to your torrc. This will cause your relay to publish its descriptor
  to the bridge authorities rather than to the default authorities.

  Alternatively, you can say
    BridgeRelay 1
    PublishServerDescriptor 0
  which will cause your relay to not publish anywhere. This could be
  useful for private bridges.

1.2. Recommendations.

  Bridge relays should use an exit policy of "reject *:*". This is
  because they only need to relay traffic between the bridge users
  and the rest of the Tor network, so there's no need to let people
  exit directly from them.

  We invented the RelayBandwidth* options for this situation: Tor clients
  who want to allow relaying too. See proposal 111 for details. Relay
  operators should feel free to rate-limit their relayed traffic.

1.3. Implementation note.

  Vidalia 0.0.15 has turned its "Relay" settings page into a tri-state
  "Don't relay" / "Relay for the Tor network" / "Help censored users".

  If you click the third choice, it forces your exit policy to reject *:*.

  If all the bridges end up on port 9001, that's not so good. On the
  other hand, putting the bridges on a low-numbered port in the Unix
  world requires jumping through extra hoops. The current compromise is
  that Vidalia makes the ORPort default to 443 on Windows, and 9001 on
  other platforms.

  At the bottom of the relay config settings window, Vidalia displays
  the bridge identifier to the operator (see Section 3.1) so he can pass
  it on to bridge users.

2. Bridge authorities.

  Bridge authorities are like normal v3 directory authorities, except
  they don't create their own network-status documents or votes. So if
  you ask a bridge authority for a network-status document or consensus,
  they behave like a directory mirror: they give you one from one of
  the main authorities. But if you ask the bridge authority for the
  descriptor corresponding to a particular identity fingerprint, it will
  happily give you the latest descriptor for that fingerprint.

  To become a bridge authority, add these lines to your torrc:
    AuthoritativeDirectory 1
    BridgeAuthoritativeDir 1

  Right now there's one bridge authority, running on the Tonga relay.

2.1. Exporting bridge-purpose descriptors

  We've added a new purpose for server descriptors: the "bridge"
  purpose. With the new router-descriptors file format that includes
  annotations, it's easy to look through it and find the bridge-purpose
  descriptors.

  Currently we export the bridge descriptors from Tonga to the
  BridgeDB server, so it can give them out according to the policies
  in blocking.pdf.

2.2. Reachability/uptime testing

  Right now the bridge authorities do active reachability testing of
  bridges, so we know which ones to recommend for users.

  But in the design document, we suggested that bridges should publish
  anonymously (i.e. via Tor) to the bridge authority, so somebody watching
  the bridge authority can't just enumerate all the bridges. But if we're
  doing active measurement, the game is up. Perhaps we should back off on
  this goal, or perhaps we should do our active measurement anonymously?

  Answering this issue is scheduled for 0.2.1.x.

2.3. Future work: migrating to multiple bridge authorities

  Having only one bridge authority is both a trust bottleneck (if you
  break into one place you learn about every single bridge we've got)
  and a robustness bottleneck (when it's down, bridge users become sad).

  Right now if we put up a second bridge authority, all the bridges would
  publish to it, and (assuming the code works) bridge users would query
  a random bridge authority. This resolves the robustness bottleneck,
  but makes the trust bottleneck even worse.

  In 0.2.2.x and later we should think about better ways to have multiple
  bridge authorities.

3. Bridge users.

  Bridge users are like ordinary Tor users except they use encrypted
  directory connections by default, and they use bridge relays as both
  entry guards (their first hop) and directory guards (the source of
  all their directory information).

  To become a bridge user, add the following line to your torrc:
    UseBridges 1

  and then add at least one "Bridge" line to your torrc based on the
  format below.

3.1. Format of the bridge identifier.

  The canonical format for a bridge identifier contains an IP address,
  an ORPort, and an identity fingerprint:
    bridge 128.31.0.34:9009 4C17 FB53 2E20 B2A8 AC19 9441 ECD2 B017 7B39 E4B1

  However, the identity fingerprint can be left out, in which case the
  bridge user will connect to that relay and use it as a bridge regardless
  of what identity key it presents:
    bridge 128.31.0.34:9009
  This might be useful for cases where only short bridge identifiers
  can be communicated to bridge users.

  In a future version we may also support bridge identifiers that are
  only a key fingerprint:
    bridge 4C17 FB53 2E20 B2A8 AC19 9441 ECD2 B017 7B39 E4B1
  and the bridge user can fetch the latest descriptor from the bridge
  authority (see Section 3.4).

3.2. Bridges as entry guards

  For now, bridge users add their bridge relays to their list of "entry
  guards" (see path-spec.txt for background on entry guards). They are
  managed by the entry guard algorithms exactly as if they were a normal
  entry guard -- their keys and timing get cached in the "state" file,
  etc. This means that when the Tor user starts up with "UseBridges"
  disabled, he will skip past the bridge entries since they won't be
  listed as up and usable in his networkstatus consensus. But to be clear,
  the "entry_guards" list doesn't currently distinguish guards by purpose.

  Internally, each bridge user keeps a smartlist of "bridge_info_t"
  that reflects the "bridge" lines from his torrc along with a download
  schedule (see Section 3.5 below). When he starts Tor, he attempts
  to fetch a descriptor for each configured bridge (see Section 3.4
  below). When he succeeds at getting a descriptor for one of the bridges
  in his list, he adds it directly to the entry guard list using the
  normal add_an_entry_guard() interface. Once a bridge descriptor has
  been added, should_delay_dir_fetches() will stop delaying further
  directory fetches, and the user begins to bootstrap his directory
  information from that bridge (see Section 3.3).

  Currently bridge users cache their bridge descriptors to the
  "cached-descriptors" file (annotated with purpose "bridge"), but
  they don't make any attempt to reuse descriptors they find in this
  file. The theory is that either the bridge is available now, in which
  case you can get a fresh descriptor, or it's not, in which case an
  old descriptor won't do you much good.

  We could disable writing out the bridge lines to the state file, if
  we think this is a problem.

  As an exception, if we get an application request when we have one
  or more bridge descriptors but we believe none of them are running,
  we mark them all as running again. This is similar to the exception
  already in place to help long-idle Tor clients realize they should
  fetch fresh directory information rather than just refuse requests.

3.3. Bridges as directory guards

  In addition to using bridges as the first hop in their circuits, bridge
  users also use them to fetch directory updates. Other than initial
  bootstrapping to find a working bridge descriptor (see Section 3.4
  below), all further non-anonymized directory fetches will be redirected
  to the bridge.

  This means that bridge relays need to have cached answers for all
  questions the bridge user might ask. This makes the upgrade path
  tricky --- for example, if we migrate to a v4 directory design, the
  bridge user would need to keep using v3 so long as his bridge relays
  only knew how to answer v3 queries.

  In a future design, for cases where the user has enough information
  to build circuits yet the chosen bridge doesn't know how to answer a
  given query, we might teach bridge users to make an anonymized request
  to a more suitable directory server.

3.4. How bridge users get their bridge descriptor

  Bridge users can fetch bridge descriptors in two ways: by going directly
  to the bridge and asking for "/tor/server/authority", or by going to
  the bridge authority and asking for "/tor/server/fp/ID". By default,
  they will only try the direct queries. If the user sets
    UpdateBridgesFromAuthority 1
  in his config file, then he will try querying the bridge authority
  first for bridges where he knows a digest (if he only knows an IP
  address and ORPort, then his only option is a direct query).

  If the user has at least one working bridge, then he will do further
  queries to the bridge authority through a full three-hop Tor circuit.
  But when bootstrapping, he will make a direct begin_dir-style connection
  to the bridge authority.

  As of Tor 0.2.0.10-alpha, if the user attempts to fetch a descriptor
  from the bridge authority and it returns a 404 not found, the user
  will automatically fall back to trying a direct query. Therefore it is
  recommended that bridge users always set UpdateBridgesFromAuthority,
  since at worst it will delay their fetches a little bit and notify
  the bridge authority of the identity fingerprint (but not location)
  of their intended bridges.

3.5. Bridge descriptor retry schedule

  Bridge users try to fetch a descriptor for each bridge (using the
  steps in Section 3.4 above) on startup. Whenever they receive a
  bridge descriptor, they reschedule a new descriptor download for 1
  hour from then.

  If on the other hand it fails, they try again after 15 minutes for the
  first attempt, after 15 minutes for the second attempt, and after 60
  minutes for subsequent attempts.

  In 0.2.2.x we should come up with some smarter retry schedules.

3.6. Implementation note.

  Vidalia 0.1.0 has a new checkbox in its Network config window called
  "My ISP blocks connections to the Tor network." Users who click that
  box change their configuration to:
    UseBridges 1
    UpdateBridgesFromAuthority 1
  and should add at least one bridge identifier.