This is chutney. It doesn't do much so far. It isn't ready for prime-time.
If it breaks, you get to keep all the pieces.
It is supposed to be a good tool for:
- Configuring a testing tor network
- Launching and monitoring a testing tor network
- Running tests on a testing tor network
Right now it only sorta does these things.
You will need:
- Python 2.7, or a supported Python 3,
- (we support Python versions that are still getting updates), and
- Tor binaries.
Chutney checks for Tor binaries in this order:
- If you run chutney's tools/test-network.sh from a tor build directory,
(or set the environment variable $TOR_DIR to a tor build directory,)
chutney will automatically detect the tor binaries, or
- If you put the location of the 'tor' and 'tor-gencert' binaries in the
environment variables $CHUTNEY_TOR and $CHUTNEY_TOR_GENCERT, respectively,
chutney will use those binaries, or
- You will need tor and tor-gencert installed somewhere in your path.
Stuff to try:
Automated Setup, Verification, and Shutdown:
./tools/test-network.sh --flavor basic-min
./tools/test-network.sh --tor --tor-gencert
(--tor-path and $TOR_DIR override --tor and --tor-gencert.)
(The script tries hard to find tor.)
(The script is pretty good at finding chutney.)
test-network.sh looks for some tor binaries (either in a nearby build
directory or in your $PATH), configures a comprehensive tor test network,
launches it, then verifies data transmission through it, and cleans up after
itself. Relative paths are supported.
You can modify its configuration using command-line arguments, or use the
chutney environmental variables documented below:
# repeats bootstrap and verify
# repeats verify
# makes multiple connections within verify
# Chutney uses /etc/resolv.conf if none of these options are set
# Use tor's compile-time default for ServerDNSResolvConfFile
(These are advanced options: in the past, they have had long-standing bugs.)
./chutney configure networks/basic
./chutney start networks/basic
./chutney status networks/basic
./chutney wait_for_bootstrap networks/basic
./chutney verify networks/basic
./chutney hup networks/basic
./chutney stop networks/basic
./chutney configure networks/basic-min
./chutney start networks/basic-min
./chutney status networks/basic-min
# Send 100MB of data per client connection
CHUTNEY_DATA_BYTES=104857600 ./chutney verify networks/basic-min
./chutney stop networks/basic-min
If chutney sends at least 5 MB of data, and it takes at least one second,
verify produces performance figures for:
- Single Stream Bandwidth: the speed of the slowest stream, end-to-end
- Overall tor Bandwidth: the sum of the bandwidth across each tor instance
The overall bandwidth approximates the CPU-bound tor performance on the
current machine, assuming tor, chutney, and the OS are multithreaded, and
network performance is infinite.
./chutney configure networks/basic-025
./chutney start networks/basic-025
./chutney status networks/basic-025
# Make 5 simultaneous connections from each client through a random exit
CHUTNEY_CONNECTIONS=5 ./chutney verify networks/basic-025
./chutney stop networks/basic-025
# Run 5 sequential verification rounds
CHUTNEY_ROUNDS=5 ./tools/test-network.sh --flavour basic
HS Connection Tests:
./chutney configure networks/hs-025
./chutney start networks/hs-025
./chutney status networks/hs-025
CHUTNEY_HS_MULTI_CLIENT=1 ./chutney verify networks/hs-025
# Make a connection from each client to each hs
# Default behavior is one client connects to each HS
./chutney stop networks/hs-025
Bandwidth File Tests:
./tools/test-network.sh --flavour bwfile
# Warning: Can't open bandwidth file at configured location: /tmp/bwfile
# Create a bwfile with no bandwidths, that is valid for a few days
date +%s > /tmp/bwfile
./tools/test-network.sh --flavour bwfile
Chutney can allow a certain number of failed tests. You can either set
CHUTNEY_ALLOW_FAILURES or use an --allow-failures command-line option to
control this. Chutney will then reattempt the test, from bootstrap
through shutdown, until either it succeeds, or until it has failed
$CHUTNEY_ALLOW_FAILURES+1 times. The default value is zero, so the default
behavior will not change.
You can also use CHUTNEY_ROUNDS=N to run multiple verification rounds, or
CHUTNEY_CONNECTIONS=N to make multiple connections within each verification
round. Any round or connection failure will fail the current test.
Waiting for the network:
The tools/test-network.sh script uses the chutney wait_for_bootstrap
command to wait for up to CHUTNEY_START_TIME seconds (default: 60), checking
whether the logged bootstrapped status for every node is 100%. It it is,
great: it succeeds. If not, it dumps the bootstrap statuses and exits.
test-network.sh does not exit immediately if a tor node fails to bootstrap.
Instead, it attempts to verify. We'll add an option to fail on tor
bootstrap failure in #20473.
Commands like "chutney verify" start immediately, and keep trying for
CHUTNEY_BOOTSTRAP_TIME seconds (default: 60). If it hasn't been
successful after that time, it fails. If CHUTNEY_BOOTSTRAP_TIME is negative,
the script leaves the network running, and exits after CHUTNEY_START_TIME
The tools/test-network.sh script waits CHUTNEY_STOP_TIME seconds
after verifying, then exits (default: immediately). If CHUTNEY_STOP_TIME is
negative, the script leaves the network running, and exits after verifying.
If none of these options are negative, test-network.sh tells the tor
processes to exit after it exits, using CHUTNEY_CONTROLLING_PID. To disable
this functionality, set CHUTNEY_CONTROLLING_PID to 1 or less.
Changing the network address:
Chutney defaults to binding to localhost. To change the IPv4 bind address,
set the CHUTNEY_LISTEN_ADDRESS environment variable. Similarly, change
CHUTNEY_LISTEN_ADDRESS_V6 for IPv6: it defaults to "no IPv6 address".
Setting it to some interface's IP address allows us to make the simulated
Tor network available on the network.
IPv6 support for both Tor and Chutney is a work in progress. Currently,
chutney verifies IPv6 client, bridge client (?), hidden service, and exit
connections. It does not use IPv6 SOCKSPorts or HiddenServicePorts.
Chutney verify uses IP addresses by default. It does not need to look up
any hostnames. We recommend that chutney users disable DNS using --offline
or CHUTNEY_DNS_CONF=/dev/null , because any DNS failures causes tests to
fail. Chutney's DNS queries also produce external traffic in a predictable
If you want to use a hostname with CHUTNEY_LISTEN_ADDRESS[_V6], or you want
to run tests that use DNS, set CHUTNEY_DNS_CONF to the path to a file in
resolv.conf format. Chutney's default of /etc/resolv.conf should be fine for
most UNIX-based operating systems. If your tor is compiled with a different
default, use --dns-resolv-conf-default or CHUTNEY_DNS_CONF="".
When the CHUTNEY_DNS_CONF file does not exist, or is a broken symlink,
chutney uses /dev/null instead. This is a workaround for bugs in tor's
use of eventdns. For example, macOS deletes the resolv.conf file when it
thinks the network is down: this can make tor exits reject all traffic,
even if a working DNS server is running on 127.0.0.1:53.
When tor has no working name servers (including --offline mode), it can
crash on SETCONF. (Chutney does not use SETCONF, but some external tor
controllers do.) To avoid this crash, set CHUTNEY_DNS_CONF to a file
containing a working name server address. For your convenience, chutney
provides a local resolv.conf file containing IPv4, IPv6, and "localhost".
Use --dns-conf resolv.conf (relative paths work).
The configuration files:
networks/basic holds the configuration for the network you're configuring
above. It refers to some torrc template files in torrc_templates/.
The working files:
chutney sticks its working files, including all data directories, log
files, etc, in ./net/. Each tor instance gets a subdirectory of net/nodes.
You can override the directory "./net" with the CHUTNEY_DATA_DIR
The test scripts are stored in the "scripts/chutney_tests" directory. These
Python files must define a "run_test(network)" function. Files starting with
an underscore ("_") are ignored.
Test scripts can be run using the following syntax:
The chutney verify command is implemented using a test script.
Test scripts in the test directory with the same name as standard commands
are run instead of that standard command. This allows expert users to replace
the standard chutney commands with modified versions.